ACPL-W314-500E Avago Technologies US Inc., ACPL-W314-500E Datasheet - Page 7

• Manufacturer Part Number: ACPL-W314-500E
• Description: OPTOCOUPLER IGBT 0.4A 6-SOIC
• Manufacturer: Avago Technologies US Inc.

Specifications of ACPL-W314-500E

• Output Type: Push-Pull, Totem-Pole
• Package / Case: 6-SOP
• Voltage - Isolation: 3750Vrms
• Number Of Channels: 1, Unidirectional
• Current - Output / Channel: 600mA
• Propagation Delay High - Low @ If: 300ns @ 7mA
• Current - Dc Forward (if): 25mA
• Input Type: DC
• Mounting Type: Surface Mount
• Fall Time: 50 ns
• Rise Time: 50 ns
• Configuration: 1 Channel
• Isolation Voltage: 3750 Vrms
• Maximum Propagation Delay Time: 700 ns
• Maximum Forward Diode Voltage: 1.8 V
• Minimum Forward Diode Voltage: 1.2 V
• Maximum Reverse Diode Voltage: 5 V
• Maximum Forward Diode Current: 12 mA
• Maximum Power Dissipation: 250 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 7. Package Characteristics
Notes:
1. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 4500 V
2. In accordance with UL 1577, each optocoupler is proof tested by applying an insulation test voltage > 6000 Vrms for 1 second (leakage detection
3. Device considered a two-terminal device: pins on input side shorted together and pins on output side shorted together.
7
Parameter
Input-Output
Momentary
Withstand Voltage
Input-Output
Resistance
Input-Output
Capacitance
current limit I
60747-5-2 Insulation Characteristics Table, if applicable.
current limit II-O < 5 A). This test is performed before 100% production test for partial discharge (method B) shown in the IEC/EN/DIN EN 60747-
5-2 Insulation Characteristics Table, if applicable.
I-O
< 5 PA). This test is performed before 100% production test for partial discharge (method B) shown in the IEC/EN/DIN EN
ACPL-P314
ACPL-W314
Symbol
V
R
C
I-O
ISO
I-O
Min.
3750
5000
Typ.
10
0.6
12
Max.
Units
V
pF
rms
Test Conditions
T
RH < 50% for 1 min.
V
Freq=1 MHz
A
I-O
= 25°C,
= 500 V
rms
for 1 second (leakage detection
Fig.
Note
1, 3
2, 3
3