LTM4608EV#PBF Linear Technology, LTM4608EV#PBF Datasheet - Page 8

• Manufacturer Part Number: LTM4608EV#PBF
• Description: IC DC/DC UMODULE 8A 68-LGA
• Manufacturer: Linear Technology
• Series: µModuler
• Type: Point of Load (POL) Non-Isolatedr

Specifications of LTM4608EV#PBF

• Design Resources: LTM4608 Spice Model
• Output: 0.6 ~ 5 V
• Number Of Outputs: 1
• Power (watts): 40W
• Mounting Type: Surface Mount
• Voltage - Input: 2.7 ~ 5.5 V
• Package / Case: 68-LGA
• 1st Output: 0.6 ~ 5 VDC @ 8A
• Size / Dimension: 0.59" L x 0.35" W x 0.11" H (15mm x 9mm x 2.8mm)
• Power (watts) - Rated: 40W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 95%
• Dc To Dc Converter Type: Step Down
• Pin Count: 68
• Input Voltage: 5.5V
• Output Voltage: 0.6 to 5V
• Switching Freq: 1.7MHz
• Output Current: 8A
• Package Type: LGA
• Output Type: Adjustable
• Switching Regulator: Yes
• Load Regulation: 0.75%
• Line Regulation: 0.2%/V
• Mounting: Surface Mount
• Input Voltage (min): 2.375V
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Compliant

LTM4608
FB (E7): The Negative Input of the Error Amplifier. Internally,
this pin is connected to V
Different output voltages can be programmed with an ad-
ditional resistor between FB and GND pins. In PolyPhase
operation, tie FB pins together for parallel operation. See
the Applications Information section for details.
I
Compensation Point. The current comparator threshold
increases with this control voltage. Tie together in parallel
operation.
I
Amplifier. Tie this pin to SGND for single phase operation.
For PolyPhase operation, tie the master’s I
while connecting all of the I
PIN FUNCTIONS
8
TH
THM
(F6): Current Control Threshold and Error Amplifier
(F5): Negative Input to the Internal I
OUT
THM
with a 10k precision resistor.
pins together.
TH
THM
Differential
to SGND
®
PGOOD (C7): Output Voltage Power Good Indicator.
Open-drain logic output that is pulled to ground when the
output voltage is not within ±10% of the regulation point.
Disabled during margining.
RUN (F1): Run Control Pin. A voltage above 1.5V will turn
on the module.
SW (C3-C5): Switching Node of the Circuit is Used for
Testing Purposes. This can be connected to an electri-
cally open circuit copper pad on the board for improved
thermal performance.
CLKOUT (F2): Output Clock Signal for PolyPhase Opera-
tion. The phase of CLKOUT is determined by the state of
the PHMODE pin.
4608fc