IS-DEV KIT-8 NKK Switches, IS-DEV KIT-8 Datasheet - Page 22

• Manufacturer Part Number: IS-DEV KIT-8
• Description: SMARTSWITCH DEVELOPMENT KIT 8
• Manufacturer: NKK Switches
• Series: SmartSwitch™r

Specifications of IS-DEV KIT-8

• Main Purpose: Switches with Programmable Display
• Utilized Ic / Part: SmartSwitch™OLED Rocker Switch
• Primary Attributes: OLED Rocker Switch
• Description/function: SMARTSWITCH Development Kit
• Maximum Operating Temperature: + 70 C
• Operating Voltage: 2.7 V to 5.5 V
• For Use With: 360-2431 - SERIAL CBL RJ11-DB9 FOR DEV KIT360-2430 - POWER SUPPLY 240VAC FOR DEV KIT360-2429 - POWER SUPPLY 120VAC FOR DEV KIT
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Secondary Attributes: -
• Embedded: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: OLED Smartswitch Rocker
• Other names: 360-2421

7850 East Gelding Drive • Scottsdale, AZ 85260-3420
[address] is two bytes with value of 0001H to FFFFH sent as ASCII HEX format.
The controller transmits back the saved address and [Attribute block] in hex format (16 bytes).
Command to display image at the requested address
This command displays an image at the requested address on the OLED display. Stops timer and operation.
[address] is two bytes with value of 0001H to FFFFH sent as ASCII HEX format.
Example: 2E 51 30303445 displays the image stored at address 004EH.
Command to increment address and display it
This command increments the pointer to the next address and displays the image. Stops timer and operation.
Example: Start at address 00A1H. Send 2E 53 and the OLED display displays the image stored at address
00A2H. Send 2E 53 again and the OLED display displays the image stored at address 00A3H.
Command to decrement address and display it
This command decrements the pointer to the next address and displays the image. Stops timer and operation.
Example: Start at address 1004H. Send 2E 52 and the OLED display displays the image stored at address
1003H. Send 2E 52 again and the OLED display displays the image stored at address 1002H.
Commands to download information directly to OLED Rocker
Note: Care must be taken using these commands. The OLED Rocker could get damaged if it is
initialized with a value exceeding the specifications. Please check the OLED Rocker data sheet and
application notes before using this command.
Command to download data directly to OLED Rocker
This command downloads data directly from the host to the OLED Rocker.
IS-Dev Kit 8 Users Manual A.doc
command format: 2EH
transmit format:
command format: 2EH
transmit format:
command format: 2EH
transmit format:
command format: 2FH
transmit format:
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone [phone] • Fax [phone]
(xxH) (xxH) (xxAH)
(xxH) (xxH)
(xxH) (xxH)
(xxH) (xxH) (xxAH)
www.nkkswitches.com • Email [e-mail]
51H
53H
52H
55H
IS-Dev Kit-8 User Manual
[address]
[number]
(xxAH)
[data]
Page 22 of 31
1209