KP125 EVAL BOARD Infineon Technologies, KP125 EVAL BOARD Datasheet - Page 27

• Manufacturer Part Number: KP125 EVAL BOARD
• Description: BOARD EVALUATION KP125
• Manufacturer: Infineon Technologies
• Type: Pressure Sensorr

Specifications of KP125 EVAL BOARD

• Contents: Fully Assembled Evaluation Board
• For Use With/related Products: KP125
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: KP125EVALBOARDIN

When addressing the EEPROM registers, the data frame consists of a 3 bit address and 16 data bits (see
Figure
Figure
until the next rising edge or in case of the LSB until the end of frame.
In general, data_in has always to be low on the falling clock edge. Only at the last falling clock edge data_in must
be high to generate an enable condition and to complete the data frame, otherwise a communication error is
detected and no write or read command is performed.
User’s Manual
26). When addressing the control registers, the data frame consists of a 5 bit address and 10 data bits (see
27). Data_in is read after the rising edge of clock and data_out is updated after the rising edge and remains
27
Digital Interface for EEPROM access
Evalkit for Pressure Sensors
Rev. 1.1, 2007-11-23
KP12x Kit