C8051F347-GM Silicon Laboratories Inc, C8051F347-GM Datasheet - Page 215

• Manufacturer Part Number: C8051F347-GM
• Description: IC 8051 MCU 32K FLASH MEM 32-QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F34xr

Specifications of C8051F347-GM

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 32-QFN
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 25
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 21x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 2304 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: KSK-SL-F34X, KSK-SL-TOOLSTICK, PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F340DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1748 - ADAPTER TOOLSTICK FOR C8051F34X770-1006 - ISP 4PORT FOR SILABS C8051F MCU
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1348-5

19.2. Data Format
UART1 has a number of available options for data formatting. Data transfers begin with a start bit (logic
low), followed by the data bits (sent LSB-first), a parity or extra bit (if selected), and end with one or two
stop bits (logic high). The data length is variable between 5 and 8 bits. A parity bit can be appended to the
data, and automatically generated and detected by hardware for even, odd, mark, or space parity. The stop
bit length is selectable between short (1 bit time) and long (1.5 or 2 bit times), and a multi-processor com-
munication mode is available for implementing networked UART buses. All of the data formatting options
can be configured using the SMOD1 register, shown in SFR Definition 19.2. Figure 19.2 shows the timing
for a UART1 transaction without parity or an extra bit enabled. Figure 19.3 shows the timing for a UART1
transaction with parity enabled (PE1 = 1). Figure 19.4 is an example of a UART1 transaction when the
extra bit is enabled (XBE1 = 1). Note that the extra bit feature is not available when parity is enabled, and
the second stop bit is only an option for data lengths of 6, 7, or 8 bits.
SPACE
SPACE
MARK
MARK
BIT TIMES
BIT TIMES
SPACE
MARK
BIT TIMES
START
START
BIT
BIT
Figure 19.2. UART1 Timing Without Parity or Extra Bit
START
BIT
D
D
Figure 19.4. UART1 Timing With Extra Bit
0
0
Figure 19.3. UART1 Timing With Parity
C8051F340/1/2/3/4/5/6/7/8/9/A/B/C/D
D
0
D
D
1
1
N bits; N = 5, 6, 7, or 8
N bits; N = 5, 6, 7, or 8
D
1
N bits; N = 5, 6, 7, or 8
Rev. 1.3
D
D
N-2
N-2
D
N-2
D
D
N-1
N-1
D
N-1
PARITY
EXTRA
STOP
BIT 1
STOP
STOP
BIT 1
BIT 1
Optional
STOP
BIT 2
Optional
Optional
STOP
STOP
BIT 2
BIT 2
215