ATMEGA32HVB-8X3 Atmel, ATMEGA32HVB-8X3 Datasheet - Page 34

• Manufacturer Part Number: ATMEGA32HVB-8X3
• Description: MCU AVR 32KB FLASH 8MHZ 44TSSOP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA32HVB-8X3

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, SPI
• Peripherals: POR, WDT
• Number Of I /o: 17
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 25 V
• Data Converters: A/D 7x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TSSOP
• Processor Series: ATMEGA32x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: SPI, TWI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRSB200
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 7 Channel
• Package: 44TSSOP
• Device Core: AVR
• Family Name: ATmega
• Maximum Speed: 8 MHz
• Operating Supply Voltage: 5|9|12|15|18|24 V
• For Use With: ATSTK524 - KIT STARTER ATMEGA32M1/MEGA32C1ATSTK600 - DEV KIT FOR AVR/AVR32ATAVRDRAGON - KIT DRAGON 32KB FLASH MEM AVRATSTK500 - PROGRAMMER AVR STARTER KIT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

8042B–AVR–06/10
• Bit 4 – OSISEL0: Oscillator Sampling Interface Select 0
Table 9-6.
• Bit 1 – OSIST: Oscillator Sampling Interface Status
This bit continuously displays the phase of the prescaled clock. This bit can be polled by the
CPU to determine the rising and falling edges of the prescaled clock.
• Bit 0 – OSIEN: Oscillator Sampling Interface Enable
Setting this bit enables the Oscillator Sampling Interface. When this bit is cleared, the Oscillator
Sampling Interface is disabled.
Notes:
1. The prescaler is reset each time the OSICSR register is written, and hence each time a new
2. Enabling the OSI module and selecting Slow RC Oscillator as input source is the only way to
oscillator source is selected.
enable the Slow RC Oscillator. The Slow RC Oscillator will not run in any other modes.
OSISEL Bit Description
OSISEL0
0
1
ATmega16HVB/32HVB
Slow RC Oscillator
Oscillator source
ULP Oscillator
34