MC908GR4CDWE Freescale Semiconductor, MC908GR4CDWE Datasheet - Page 34

• Manufacturer Part Number: MC908GR4CDWE
• Description: IC MCU 4K FLASH 8MHZ 28-SOIC
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908GR4CDWE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 17
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Controller Family/series: HC08
• No. Of I/o's: 21
• Ram Memory Size: 384Byte
• Cpu Speed: 8MHz
• No. Of Timers: 1
• Embedded Interface Type: I2C, SCI, SPI
• Rohs Compliant: Yes
• Processor Series: HC08GR
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8.2 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, DEMO908GZ60E, M68CBL05CE, M68EML08GPGTE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

General Description
1.6.10 Port C I/O Pins (PTC1–PTC0)
1.6.11 Port D I/O Pins (PTD6/T2CH0–PTD0/SS)
1.6.12 Port E I/O Pins (PTE1/RxD–PTE0/TxD)
Technical Data
34
NOTE:
PTC1–PTC0 are general-purpose, bidirectional I/O port pins. See
Input/Output Ports
QFP packages.
These port pins also have selectable pullups when configured for input
mode. The pullups are disengaged when configured for output mode.
The pullups are selectable on an individual port bit basis.
PTD6–PTD0 are special-function, bidirectional I/O port pins.
PTD3–PTD0 can be programmed to be serial peripheral interface (SPI)
pins, while PTD6–PTD4 can be individually programmed to be timer
interface module (TIM1 and TIM2) pins. See
(TIM),
These port pins also have selectable pullups when configured for input
mode. The pullups are disengaged when configured for output mode.
The pullups are selectable on an individual port bit basis.
When the port pins are configured for special-function mode (SPI, TIM1,
TIM2), pullups can be selectable on an individual port pin basis.
PTE1–PTE0 are special-function, bidirectional I/O port pins. These pins
can also be programmed to be serial communications interface (SCI)
pins. See
(I/O).
Any unused inputs and I/O ports should be tied to an appropriate logic
level (either V
do not require termination, termination is recommended to reduce the
possibility of electro-static discharge damage.
Freescale Semiconductor, Inc.
For More Information On This Product,
Serial Peripheral Interface
Serial Communications Interface (SCI)
Go to: www.freescale.com
DD
General Description
or V
(I/O). PTC0 and PTC1 are only available on 32-pin
SS
). Although the I/O ports of the MC68HC908GR8
(SPI), and
Input/Output Ports
Timer Interface Module
MC68HC908GR8 — Rev 4.0
and
Input/Output Ports
MOTOROLA
(I/O).