R5F212A8SNFA#U0 Renesas Electronics America, R5F212A8SNFA#U0 Datasheet - Page 339

• Manufacturer Part Number: R5F212A8SNFA#U0
• Description: IC R8C/2A MCU FLASH 64K 64-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/2x/2Ar

Specifications of R5F212A8SNFA#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 55
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 64-LQFP
• For Use With: R0K5212D8S001BE - KIT STARTER FOR R8C/2DR0K5212D8S000BE - KIT DEV FOR R8C/2D
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/2A Group, R8C/2B Group
Rev.2.00
REJ09B0324-0200
Table 14.47
BFC0, BFD0, BFC1, BFD1: Bits in TRDMR register
TRDGRA0
TRDGRB0
TRDGRA1
TRDGRB1
TRDGRC0
TRDGRD0
TRDGRC1
TRDGRD1
Register
Since values cannot be written to the TRDGRB0, TRDGRA1, or TRDGRB1 register directly after count
operation starts (prohibited item), use the TRDGRD0, TRDGRC1, or TRDGRD1 register as a buffer register.
However, to write data to the TRDGRD0, TRDGRC1, or TRDGRD1 register, set bits BFD0, BFC1, and BFD1
to 0 (general register). After this, bits BFD0, BFC1, and BFD1 may be set to 1 (buffer register).
Nov 26, 2007
−
−
−
−
−
BFD0 = 1 Buffer register. Set the changing point of next PWM1 output.
BFC1 = 1 Buffer register. Set the changing point of next PWM2 output.
BFD1 = 1 Buffer register. Set the changing point of next PWM3 output.
Setting
TRDGRji Register Functions in Complementary PWM Mode
General register. Set the PWM period at initialization.
Setting range: Setting value or above in TRD0 register
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
General register. Set the changing point of PWM1 output at
initialization.
Setting range: Setting value or above in TRD0 register
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
General register. Set the changing point of PWM2 output at
initialization.
Setting range: Setting value or above in TRD0 register
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
General register. Set the changing point of PWM3 output at
initialization.
Setting range: Setting value or above in TRD0 register
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
This register is n
(Refer to 14.4.2 Buffer Operation.)
Setting range: Setting value or above in TRD0 register
Set this register to the same value as the TRDGRB0 register
for initialization.
(Refer to 14.4.2 Buffer Operation.)
Setting range: Setting value or above in TRD0 register
Set this register to the same value as the TRDGRA1 register
for initialization.
(Refer to 14.4.2 Buffer Operation.)
Setting range: Setting value or above in TRD0 register
Set this register to the same value as the TRDGRB1 register
for initialization.
Page 317 of 580
FFFFh - TRD0 register setting value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
ot used in complementary PWM mode.
Register Function
(Output inverted every half
period of TRDIOC0 pin)
TRDIOB0
TRDIOD0
TRDIOA1
TRDIOC1
TRDIOB1
TRDIOD1
−
TRDIOB0
TRDIOD0
TRDIOA1
TRDIOC1
TRDIOB1
TRDIOD1
PWM Output Pin
14. Timers