SAK-TC1796-256F150E BE Infineon Technologies, SAK-TC1796-256F150E BE Datasheet - Page 53

• Manufacturer Part Number: SAK-TC1796-256F150E BE
• Description: IC MCU 32BIT FLASH 416-BGA
• Manufacturer: Infineon Technologies
• Series: TC17xxr

Specifications of SAK-TC1796-256F150E BE

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: ASC, CAN, EBI/EMI, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 123
• Program Memory Size: 2MB (2M x 8)
• Program Memory Type: FLASH
• Ram Size: 256K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 44x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 416-BGA
• Data Bus Width: 32 bit
• Data Ram Size: 256 KB
• Interface Type: ASC, JTAG, MLI, MSC, SSC
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 119
• Number Of Timers: 260
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (12 bit, 16 Channel) / 10 bit, 4 Channel
• Packages: P-BGA-416
• Max Clock Frequency: 150.0 MHz
• Sram (incl. Cache): 256.0 KByte
• Can Nodes: 4
• A / D Input Lines (incl. Fadc): 44
• Program Memory: 2.0 MB
• For Use With: B158-H8537-G2-X-7600IN - KIT STARTER TC179X FAMILY
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000438972

The downstream and upstream channels of the MSC module communicate with the
external world via nine I/O lines. Eight output lines are required for the serial
communication of the downstream channel (clock, data, and enable signals). One out of
eight input lines SDI[7:0] is used as serial data input signal for the upstream channel. The
source of the serial data to be transmitted by the downstream channel can be MSC
register contents or data that is provided at the ALTINL/ALTINH input lines. These input
lines are typically connected to other on-chip peripheral units (for example with a timer
unit like the GPTA). An emergency stop input signal allows to set bits of the serial data
stream to dedicated values in emergency case.
Clock control, address decoding, and interrupt service request control are managed
outside the MSC module kernel. Service request outputs are able to trigger an interrupt
or a DMA request.
Features
•
•
•
Data Sheet
Fast synchronous serial interface to connect power switches in particular, or other
peripheral devices via serial buses
High-speed synchronous serial transmission on downstream channel
– Maximum serial output clock frequency:
– Fractional clock divider for precise frequency control of serial clock
– Command, data, and passive frame types
– Start of serial frame: Software-controlled, timer-controlled, or free-running
– Programmable upstream data frame length (16 or 12 bits)
– Transmission with or without SEL bit
– Flexible chip select generation indicates status during serial frame transmission
– Emergency stop without CPU intervention
Low-speed asynchronous serial reception on upstream channel
– Baud rate:
– Standard asynchronous serial frames
– Parity error checker
– 8-to-1 input multiplexer for SDI lines
– Built-in spike filter on SDI lines
(= 37.5 Mbit/s @ 75 MHz module clock)
f
MSC
divided by 8, 16, 32, 64, 128, 256, or 512
53
f
FCL
=
f
MSC
/2
Functional Description
f
MSC
V1.0, 2008-04
TC1796