SDSXA-016G-000000 SanDisk, SDSXA-016G-000000 Datasheet - Page 21

• Manufacturer Part Number: SDSXA-016G-000000
• Description: SSD 2.5" SATA 16GB
• Manufacturer: SanDisk
• Series: SSD SATAr
• Type: Flash Diskr

Specifications of SDSXA-016G-000000

• Memory Size: 16GB
• Memory Type: FLASH - Nand
• Density: 16GByte
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Operating Temperature Classification: Industrial
• Programmable: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FFD-25-SATA-16-X-A-P; FFD-25-SATA-16-X-A-P

still active when the procedure is complete, the SSD re-launches the default Sanitize procedure,
as described in Table 10.
4.4.1.5 Random Data Written During the Sanitize Procedure
The random data used to overwrite user data is a digest of pseudo-random generation and real
random data. The pseudo-random generation is seeded in such a manner that even if the SSD
launches the Sanitize command under identical external conditions (for example, if the unit is
powered on with Sanitize Interrupt active), it will produce different seeds and different
pseudo-random data.
4.4.1.6 LED Activity During the Sanitize Procedure
During the Format and Sanitize procedures, the red LED provides the following indications:
4.4.1.7 Using the SSD After a Sanitize Procedure
After performing Sanitize Procedure, if fill option is not activated, the user must perform a
low-level format on the media. Failing to perform the low-level format may result in a longer
start-up time.
4.4.1.8 Sanitizing Based on DoD 5220.22-M
The USA DoD 5220.22-M National Industrial Security Program Operating Manual (NISPOM),
January 1995, specifies the sanitization processes for each media type (in order to be considered
declassified) in Chapter 8, Automated Information System Security. For Flash EPROM media
type, the sanitize process is as follows:


The SSD complies with the above requirement, as described in Table 10.
4.4.1.9 Sanitizing Based on NSA Manual 130-2
The USA National Security Agency (NSA) specifies the procedure for sanitizing semiconductor
memory devices in its 130-2 Media Declassification and Destruction Manual (Paragraph 5,
Section 7). In the updated document version dated November 2000 Section 4.6c indicates the
procedure for sanitizing EEPROM:


The SSD complies with the above requirement, as described in Table 10.
13
a. Remains lit during the Erase phase (for the Sanitize procedure, during each erase phase)
b. Blinks during the Media Fill phase (for the Sanitize procedure, during each fill phase)
c. Remains lit for a short period while the disk achieves ready status after completing the
“Overwrite all addressable location with a single character.”
“Perform a full chip erase as per manufacturer‟s data sheet.”
“Overwriting all locations with a pseudo-random pattern twice”.
“Overwriting all locations with a known pattern”.
Then
Then
Sanitize procedures.
Product Specification and User Manual
SSD (Formerly FFD) Serial ATA 2.5"
42-PS-0605-00 Rev. 1.3