SDSXA-016G-000000 SanDisk, SDSXA-016G-000000 Datasheet - Page 36

• Manufacturer Part Number: SDSXA-016G-000000
• Description: SSD 2.5" SATA 16GB
• Manufacturer: SanDisk
• Series: SSD SATAr
• Type: Flash Diskr

Specifications of SDSXA-016G-000000

• Memory Size: 16GB
• Memory Type: FLASH - Nand
• Density: 16GByte
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Package Type: Not Required
• Operating Temperature Classification: Industrial
• Programmable: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FFD-25-SATA-16-X-A-P; FFD-25-SATA-16-X-A-P

10. I
This section provides you with the information you need to properly install your new SSD Serial
ATA 2.5” Flash Disk. M-Systems recommends that qualified and trained personnel install the
drive.
The following chapters contain handling information, mounting considerations, address and
configuration setups, cabling and connector information and information about obtaining
technical assistance and service.
Remember - Always back up your data before adding disk drives to your system!
10.1. Kit Contents
Ensure that your kit contains the following items:


If any items are missing, please contact your dealer.
10.2. Visual Inspection
Before unpacking or handling a drive, take all proper electrostatic discharge (ESD) precautions,
including personnel and equipment grounding.
Before you begin installing the SSD, inspect the package and device as follows:




10.3. Handling Instructions
You can prolong the life of your SSD, increase its reliability, and prevent unnecessary damage
by following the instructions listed below. Failure to follow any of these instructions may void
your warranty.




SSD Serial ATA 2.5” Flash Disk
Four mounting screws and three jumpers, M-Systems part no. 41-PK-001-00.
If the shipping container appears to be damaged or water stained, notify your dealer.
Remove the disk from its shipping enclosure and inspect it for any damage that may have
occurred during shipment. If any damage is observed, notify your dealer.
Record the disk serial number and shipment date.
Retain the original shipping enclosure and all packing material for re-shipment.
Always take all proper electrostatic discharge (ESD) precautions, including personnel and
equipment grounding.
Always operate the SSD within the environmental specifications.
Always use a grounded wrist strap when handling the SSD. Drives that are not installed in
the system are sensitive to ESD damage.
Always handle the SSD carefully.
NSTALLING AND
U
SING THE
SSD S
ERIAL
ATA 2.5”