ZUP/NC401 TDK Corporation, ZUP/NC401 Datasheet - Page 54

• Manufacturer Part Number: ZUP/NC401
• Description: CABLE COMMUNICATIONS RS232
• Manufacturer: TDK Corporation
• Series: ZUPr

Specifications of ZUP/NC401

• Connector Type: D-Sub 09 pos Male to RS232 8 pos Male
• Length: 3.28' (1.00m)
• Cable Type: Round
• Color: White
• Shielding: Shielded
• Usage: Communication
• Cable Length: 1m
• Connector Type B: RJ45
• Connector Type A: DB9 Female
• Cable Assembly Type: Serial
• For Use With: ZUP Series Power Supplies
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 285-1666

1. Equipment :
2. PC Set Up :
3. ZUP Set Up
4. Communication
5.6.4. COMMUNICATION TEST SET UP
ATTENTION:
test
PC with Windows HyperTerminal Private Edition software installed , ZUP Power
Supply , RS232 cable (NC401 when the PC uses DB-9 or NC403 when the PC uses
DB-25 connector).
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3.1
3.2
3.3
4.1
4.2
output current.
Do not use Backspace, Enter, Ctrl or Alt keys.
If an error was made during writing , press “;” and write again the command.
The ZUP output should turn on and display will show the output voltage and actual
Open Hyper Terminal Private Edition...... New Connection
Enter a name
Connect to...................... Direct to Com1 or Com2
Set the Port Properties as follows:
Open Properties in the program:
Setting: ASCII Set Up
Press
Connect ZUP Power Supply to the PC using RS232 cable (NC401 or NC403)
Model identification test:
Command test:
Set via the front panel: Baud Rate 9600, RS232/RS485 to RS232, address:01
Set Rem/Local to Rem (Rem LED illuminates)
select Echo characters locally
Caps Lock
PC: write
ZUP response:
for capital letters
PC: write:
Bits per second...................... 9600
Data bits...................................... 8
Parity.................................... None
Stop bits....................................... 1
Flow control..................... Xon/Xoff
File:............... Properties
48
:OUT1; :VOLn; :CURn;
: ADR01;:MDL?;
Nemic-Lambda<XXV-YYA>
(for n refer 5.5.3)