ATTINY861-20PU Atmel, ATTINY861-20PU Datasheet - Page 64

• Manufacturer Part Number: ATTINY861-20PU
• Description: Microcontrollers (MCU) 8kB Flash 0.512kB EEPROM 16 I/O Pins
• Manufacturer: Atmel

Specifications of ATTINY861-20PU

• Processor Series: ATTINY8x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: 2-Wire/SPI/USI
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT, ATAVRMC320
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 11-ch x 10-bit
• Program Memory Type: Flash
• Program Memory Size: 8 KB
• Package / Case: PDIP-20
• Controller Family/series: AVR Tiny
• Core Size: 8 Bit
• No. Of I/o's: 16
• Eeprom Memory Size: 512Byte
• Ram Memory Size: 512Byte
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Package: 20PDIP
• Device Core: AVR
• Family Name: ATtiny
• Maximum Speed: 20 MHz
• Ram Size: 512 Byte
• Operating Temperature: -40 to 85 °C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

64
ATtiny261/461/861
• Port A, Bit 5 – ADC4/AIN2/PCINT5
• Port A, Bit 4 – ADC3/ICP0/PCINT4
• Port A, Bit 3 – AREF/PCINT3
• Port A, Bit 2 – ADC2/INT1/USCK/SCL/PCINT2
• Port A, Bit 1 – ADC1/DO/PCINT1
• Port A, Bit 0 – ADC0/DI/SDA/PCINT0
• ADC4: Analog to Digital Converter, Channel 4.
• AIN2: Analog Comparator Input. Configure the port pin as input with the internal pull-up
• PCINT5: Pin Change Interrupt source 5.
• ADC3: Analog to Digital Converter, Channel 3.
• ICP0: Timer/Counter0 Input Capture Pin.
• PCINT4: Pin Change Interrupt source 4.
• AREF: External analog reference for ADC. Pullup and output driver are disabled on PA3
• PCINT3: Pin Change Interrupt source 3.
• ADC2: Analog to Digital Converter, Channel 2.
• INT1: The PA2 pin can serve as an External Interrupt source 1.
• USCK: Three-wire mode Universal Serial Interface Clock.
• SCL: Two-wire mode Serial Clock for USI Two-wire mode.
• PCINT2: Pin Change Interrupt source 2.
• ADC1: Analog to Digital Converter, Channel 1.
• DO: Three-wire mode Universal Serial Interface Data output. Three-wire mode Data output
• PCINT1: Pin Change Interrupt source 1.
• ADC0: Analog to Digital Converter, Channel 0.
• DI: Data Input in USI Three-wire mode. USI Three-wire mode does not override normal port
• SDA: Two-wire mode Serial Interface Data.
• PCINT0: Pin Change Interrupt source 0.
switched off to avoid the digital port function from interfering with the function of the Analog
Comparator.
when the pin is used as an external reference or internal voltage reference with external
capacitor at the AREF pin.
overrides PORTA1 value and it is driven to the port when data direction bit DDA1 is set.
PORTA1 still enables the pull-up, if the direction is input and PORTA1 is set.
functions, so pin must be configure as an input for DI function.
2588E–AVR–08/10