ST7FLITE05Y0B6 FARNELL, ST7FLITE05Y0B6 Datasheet - Page 41

• Manufacturer Part Number: ST7FLITE05Y0B6
• Description: IC, 8BIT MCU, ST7, 16MHZ, DIP-16
• Manufacturer: FARNELL

Specifications of ST7FLITE05Y0B6

• Controller Family/series: ST7
• No. Of I/o's: 13
• Ram Memory Size: 128Byte
• Cpu Speed: 16MHz
• No. Of Timers: 2
• Interface: SPI
• Core Size: 8 Bit
• Program Memory Size: 1.5 Kb
• Peripherals: ADC, PWM, Timer
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

POWER SAVING MODES (Cont’d)
9.4.2.1 HALT Mode Recommendations
– Make sure that an external event is available to
– When using an external interrupt to wake up the
– For the same reason, reinitialize the level sensi-
wake up the microcontroller from Halt mode.
microcontroller, reinitialize the corresponding I/O
as “Input Pull-up with Interrupt” before executing
the HALT instruction. The main reason for this is
that the I/O may be wrongly configured due to ex-
ternal interference or by an unforeseen logical
condition.
tiveness of each external interrupt as a precau-
tionary measure.
– The opcode for the HALT instruction is 0x8E. To
– As the HALT instruction clears the I bit in the CC
avoid an unexpected HALT instruction due to a
program counter failure, it is advised to clear all
occurrences of the data value 0x8E from memo-
ry. For example, avoid defining a constant in
ROM with the value 0x8E.
register to allow interrupts, the user may choose
to clear all pending interrupt bits before execut-
ing the HALT instruction. This avoids entering
other peripheral interrupt routines after executing
the external interrupt routine corresponding to
the wake-up event (reset or external interrupt).
ST7LITE0xY0, ST7LITESxY0
41/124
1