PIC18F2320-E/SO Microchip Technology, PIC18F2320-E/SO Datasheet - Page 35

• Manufacturer Part Number: PIC18F2320-E/SO
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,SOP,28PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2320-E/SO

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

3.3.1
This mode is unique among the three low-power Idle
modes in that it does not disable the primary system
clock. For timing sensitive applications, this allows for
the fastest resumption of device operation, with its
more accurate primary clock source, since the clock
source does not have to “warm up” or transition from
another oscillator.
PRI_IDLE mode is entered by setting the IDLEN bit,
clearing the SCS bits and executing a SLEEP instruc-
tion. Although the CPU is disabled, the peripherals
continue to be clocked from the primary clock source
specified in Configuration Register 1H. The OSTS bit
remains set in PRI_IDLE mode (see Figure 3-3).
FIGURE 3-3:
FIGURE 3-4:
© 2007 Microchip Technology Inc.
CPU Clock
Peripheral
CPU Clock
Program
Peripheral
Counter
Program
Counter
OSC1
Clock
OSC1
Clock
PRI_IDLE MODE
Q1
TRANSITION TIMING TO PRI_IDLE MODE
TRANSITION TIMING FOR WAKE FROM PRI_IDLE MODE
Wake-up Event
Q2
PC
PC
CPU Start-up Delay
Q3
Q4
PIC18F2220/2320/4220/4320
Q1
PC + 2
When a wake-up event occurs, the CPU is clocked
from the primary clock source. A delay of approxi-
mately 10 μs is required between the wake-up event
and when code execution starts. This is required to
allow the CPU to become ready to execute instructions.
After the wake-up, the OSTS bit remains set. The
IDLEN and SCS bits are not affected by the wake-up
(see Figure 3-4).
Q1
Q2
PC + 2
Q3
DS39599G-page 33
Q4