NFK1-SC FLUKE NETWORKS, NFK1-SC Datasheet - Page 151

• Manufacturer Part Number: NFK1-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK1-SC

• Lead Free Status / RoHS Status: na

Getting a Good Image
Table 6-1 describes how to solve some common problems
with FiberInspector images.
The image is indistinguishable or
cannot be focused.
The core is not visible.
The scale for measuring core sizes is
wrong and the wrong magnification
value is shown.
The image is just a black square.
The image cannot be centered.
Problem
Table 6-1. Getting a Good FiberInspector Image
Press
image.
Verify that the style of adapter tip on the probe matches the style of
connector you are inspecting and that the probe is slid all the way onto the
connector.
Shine a visible light into the other end of the fiber.
Press
setting (250X or 400X), or turn the smaller ring on the probe to change
magnification.
Press
Try moving the probe around on the connector. If the image still cannot be
centered, the probe’s detector may have been knocked out of alignment by
rough handling. Contact Fluke Networks for service information.
B
E
E
Camera to set the magnification to match the FiberInspector probe’s
to switch to Real Time mode before focusing and to refresh the
Real Time to activate the probe.
Solution
Using the FiberInspector Option
Getting a Good Image
6
6-7