NFK1-SC FLUKE NETWORKS, NFK1-SC Datasheet - Page 224

• Manufacturer Part Number: NFK1-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK1-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Selecting a Custom Limit
To select a custom limit to use for testing, do the following:
1
2
3
To delete a custom limit, do the following:
1
2
11-8
Verify that the fiber type selected on the Cable tab in
Setup is used in the test limit you want to select. The
test limit will not appear if it does not support the
selected fiber type.
Press
Press
from the list.
Press
Highlight the limit; then press
S
B
F
More, select Custom.; then select the limit
; then select Edit Custom Test Limit.
,then select TEST LIMIT on a test’s tab.
B
Delete Limit.
If the Limit or Fiber Type is Not Valid
If the tester says that the limit or fiber type is not valid
when you try to run a test, you may need to add more
parameters to the configuration. For details, see “If the Test
Limit or Fiber Type is Not Valid with the Test” in Chapter 2
or press
H
when the message appears.