NFK1-SC FLUKE NETWORKS, NFK1-SC Datasheet - Page 92

• Manufacturer Part Number: NFK1-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK1-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Running the OTDR Test
Figure 3-9 shows the equipment needed for OTDR tests.
To run the OTDR test do the following:
1
2
3-16
A
B
C
D
Verify that the settings described in Table 3-1 are
appropriate.
Select Auto OTDR mode: On the HOME screen, press
A
Tester with OFTM-56xxB or OFTM-57xx module
Memory card (optional)
Spare battery pack (optional)
AC adapter with line cord (optional)
Change Test; then select Auto OTDR.
Figure 3-9. Equipment for OTDR Tests
E
F
3
4
5
6
Launch fiber and receive fibers. Match the fiber to be
tested. Match cable connectors at one end when
possible.
Fiber cleaning supplies
Clean the connectors on the launch fiber and the fiber
to be tested.
Connect to the tester’s OTDR port to the cabling as
shown in Figure 3-10, 3-11, or 3-12.
Press
To save the results, press
ID; then press
T
to start the OTDR test.
s
again.
s
, select or create a fiber
ajt42f.eps