NFK1-SC FLUKE NETWORKS, NFK1-SC Datasheet - Page 65

• Manufacturer Part Number: NFK1-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK1-SC

• Lead Free Status / RoHS Status: na

Tutorial: Running a Loss/Length Test
This section familiarizes you with the basic operation of the
loss/length option by guiding you through a loss/length test
in Smart Remote mode.
Required Equipment
•
•
•
•
One OptiFiber tester set up as follows:
A second OptiFiber tester set up like the first one, or a
DTX Smart Remote with a fiber module for the correct
wavelength and the correct connector adapter
installed
Two lengths of fiber cabling or a length of duplex
cabling to test
Two known-good duplex reference test cords of the
same fiber type as the cabling to be tested. See Figures
2-3 and 2-4 to determine the connector types you will
need.
OFTM-5612B or OFTM-5732 module installed
Connector adapter installed on the tester's INPUT
port. Match the connectors on the fiber under test.
Charged batteries attached or the ac adapters
connected
Job settings configured as described in the tutorial
“Preparing to Save Tests” on page 2-10
•
•
Step 1: Selecting Loss/Length Test Mode
On the HOME screen of both testers, verify that LOSS
LENGTH appears in the upper-left corner of the screen. If it
does not, press
Step 2: Selecting a Fiber Type
Do the following on the tester you will use to initiate tests
(the main tester):
2-1 Press
2-2 Use
2-3 Use
For testing multimode fiber, two mandrels of the
correct size
Fiber cleaning supplies
then press
If the fiber type you want is not shown, press
More, select a FIBER GROUP; then highlight and select
a fiber type.
LM
LM
S
Tutorial: Running a Loss/Length Test
A
; then press
t
to highlight FIBER TYPE; then press
to highlight the type of fiber you will test;
Getting Started Testing Fiber
Change Test then select Loss/Length.
to select the fiber type.
D
Tab to select the Cable tab.
B
t
2-17
2
.