NFK1-SC FLUKE NETWORKS, NFK1-SC Datasheet - Page 87

• Manufacturer Part Number: NFK1-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK1-SC

• Lead Free Status / RoHS Status: na

SETUP Tab
OTDR tab
OTDR tab
TEST LIMIT
WAVELENGTH
LAUNCH
COMPENSATION
OTDR PLOT GRID
Setting
Table 3-1. Settings for OTDR Tests (cont.)
The tester compares the OTDR test results to the selected test limit to produce
PASS/FAIL results. You can select factory-installed limits or custom limits, which
you configure with the Edit Custom Test Limit function in FUNCTIONS. See
Chapter 10 for information on creating custom limits.
You can test cabling at one or all the wavelengths supported by the installed
module and the selected test limit.
Enables or disables launch fiber compensation. See Set Launch Fiber
Compensation below.
Enables or disables the grid on the OTDR trace.
Select a fiber type before selecting a test limit. The fiber type determines
which test limits are available.
If you select the dual-wavelength setting, be sure to select a fiber type and
test limit that supports both wavelengths.
Description
Note
Note
Setting Up for OTDR Testing
Using the OTDR
-continued-
3-11
3