C500BC061 Omron, C500BC061 Datasheet - Page 133

• Manufacturer Part Number: C500BC061
• Description: BACKPLANE
• Manufacturer: Omron

Specifications of C500BC061

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Specifications
Installing the Link Adapter
Use the Link Adapter with a supply of either 100/200 VAC or 12 to 24 VDC/VAC power.
Short circuit the repeater input terminals.
When installing the Link Adapter anywhere it could come into contact with people, be sure to set the Link
Adapter up so that the terminal block won’t be touched accidentally.
Cable Length
3G2A9-AL004-(P)E Link Adapter
Dimensions
APF
H-PCF
PCF
120
52.5
Cable
!
!
Caution
Caution
Note 1. Always short circuit the repeater input terminals. The Unit will not operate
POWER
FUSE 0.3A
Be sure to use a wire of at least 1.25 mm
Use M4 screws for tightening crimp terminals.
Use ring crimp terminals for wiring. Do not connect bare stranded wires directly
to terminal blocks.
Tighten the screws on the terminal block of the AC Power Supply Unit to a torque
of 1.2 N⋅m. The loose screws may result in burning or malfunction.
2. Always cap unused Optical Connectors. If the connectors are not capped,
Be sure to use a wire of at least 1.25 mm
Use M4 screws for tightening crimp terminals.
Use ring crimp terminals for wiring. Do not connect bare stranded wires directly
to terminal blocks.
Tighten the screws on the terminal block of the AC Power Supply Unit to a torque
of 1.2 N⋅m. The loose screws may result in burning or malfunction.
Fuse
20 m
100 m
200 m
RS232C
160
174
188
unless these terminals are shorted.
ambient light interference can enter the Optical Fiber Cable and cause
transmission errors.
200 VAC
Terminal block
100
VAC
3G2A9-AL002-PE
RS422
LG FG
Approx. 140
Not available
200 m
800 m
2
2
in thickness.
in thickness.
CTS
Termi-
nator
Exter-
nal
OFF
0 V
ON
63
3G2A9-AL002-E
Mounting Holes
Appendix B
4.5
10 dia.
7
117