C500BC061 Omron, C500BC061 Datasheet - Page 157

• Manufacturer Part Number: C500BC061
• Description: BACKPLANE
• Manufacturer: Omron

Specifications of C500BC061

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

reversible counter
reversible shift register
right-hand instruction
rightmost (bit/word)
rotate register
RUN mode
scheduled interrupt
self diagnosis
self-maintaining bit
servicing
set
set value
shift register
Simplex CPU
Simplex System
Slave
Slave Rack
A counter that can be both incremented and decremented depending on the
specified conditions.
A shift register that can shift data in either direction depending on the speci-
fied conditions.
Another term for terminal instruction.
The lowest numbered bits of a group of bits, generally of an entire word, or
the lowest numbered words of a group of words. These bits/words are often
called least-significant bits/words.
A shift register in which the data moved out from one end is placed back into
the shift register at the other end.
The operating mode used by the PC for normal control operations.
An interrupt that is automatically generated by the system at a specific time
or program location specified by the operator. Scheduled interrupts result in
the execution of specific subroutines that can be used for instructions that
must be executed repeatedly for a specified period of time.
A process whereby the system checks its own operation and generates a
warning or error if an abnormality is discovered.
A bit that is programmed to maintain either an OFF or ON status until set or
reset by specified conditions.
The process whereby the PC provides data to or receives data from external
devices or remote I/O Units, or otherwise handles data transactions for Link
Systems.
The process of turning a bit or signal ON.
The value from which a decrementing counter starts counting down or to
which an incrementing counter counts up (i.e., the maximum count), or the
time from which or for which a timer starts timing. Set value is abbreviated
SV.
One or more words in which data is shifted a specified number of units to the
right or left in bit, digit, or word units. In a rotate register, data shifted out one
end is shifted back into the other end. In other shift registers, new data (ei-
ther specified data, zero(s) or one(s)) is shifted into one end and the data
shifted out at the other end is lost.
A C2000H PC that uses only a single CPU as opposed to a Duplex CPU.
This term is meaningless with other PCs, which are only available with sim-
plex operation.
A C2000H PC System that uses a Simplex CPU.
Short for Remote I/O Slave Unit.
A Rack containing a Remote I/O Slave Unit and controlled through a Remote
I/O Master Unit. Slave Racks are generally located away from the CPU Rack.
Glossary
141