C500BC061 Omron, C500BC061 Datasheet - Page 83

• Manufacturer Part Number: C500BC061
• Description: BACKPLANE
• Manufacturer: Omron

Specifications of C500BC061

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Communications Protocol (C200HS/HX/HG/HE only)
260 IF LEN(FCS
270 RETURN
280 ’*********************************************
290 *EROPE
300 PRINT ”ERL=”;ERL,”ERR=”;ERR
310 CLOSE #1
320 END
330 ’*********************************************
* The FCS calculation subroutine starting from statement 180 is for data transmission. The data length L will differ for the response
because the response contains other data such as FCS and *.
3-3
IBM
Commands from the PC
Command Format
. ....................................................
Communications Protocol (C200HS/HX/HG/HE only)
S
)=1 THEN FCS
1, 2, 3... 1.
To adjust the above program for IBM compatibles replace the following four
lines.
30
40
100
160
The C200HS/HX/HG/HE allows the PC to issue commands to the host computer
under the following conditions. The command makes it possible to send the PC’s
data to the host computer without using any command from the host computer.
2.
When the TXD (- - ) instruction is executed, data is transmitted to the host com-
puter in the following format.
The data (61 bits maximum) specified by the TXD ( - - ) instruction is converted
into ASCII (122 characters maximum) and transmitted. There will be no re-
sponse from the host computer for the above command.
S
=”0”+FCS
The C200HS/HX/HG/HE must be connected to the host computer via a
C200H-LK101-PV1, C200H-LK2jj-V1 Host Link Unit or the peripheral
port of the C200HS/HX/HG/HE’s CPU. Refer to the C200HS Operation
Manual or C200HX/HG/HE Operation Manual for details.
The TRANSMIT (TXD ( - - )) must be executed from the user ladder-dia-
gram program. Refer to 4-36 TRANSMIT for details.
ON ERROR GOTO 300
OPEN “COM:E72” FOR OUTPUT AS#1
GOSUB 190
GOTO 70
@
. .......................
X10
Unit no.
S
1
X10
0
E
X
Display of line no. containing error and error no.
Closes RS-232C
Data
Designated data in
ASCII code.
FCS
*
Section 3-3
CR
67