CV500-MC221 Omron, CV500-MC221 Datasheet - Page 41

• Manufacturer Part Number: CV500-MC221
• Description: SERVO CONTROL MODULE
• Manufacturer: Omron

Specifications of CV500-MC221

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Note This operation is not necessary if the window is already open.
3. Selecting [Start]
4. Switching the Servo Driver OFF then ON
1. Opening the User Parameter Window
2. Selecting [PC Drive]
Transferring Parameters from Servo Driver to the IBM PC/AT or
Compatible
Parameter Download window opens.
Parameters are transferred to Servo Driver, Parameter Download window closes, and program re-
turns to the User Parameter window.
Refer to the following.
Click on [Start].
Select [Start] using the Tab Key. Press the Space Key or Return Key.
Caution when Transferring Parameters to Servo Driver
Click on [PC Drive].
Certain parameters will be enabled when the Servo Driver is switched OFF then ON again. Once these param-
eters have been changed, switch OFF the parameter-loaded Servo Driver. Make sure the screen’s indicator is
not lit before switching ON again.
This applies to the Setup Parameters as well as some User Parameter Numbers. For further information refer
to the appropriate product operation manual.
When connecting a R88D-UA
has been modified, switch the Servo Driver ON and restart the Computer Monitor Software or re-execute the
[Servo Driver Selection]. Normally, the [12 bit Absolute Encoder Alarm Reset] is not activated.
Click on or select [Parameter] -- [User Parameter].



HA/LA model and the Setup Parameter Cn-01 bit No. E (Encoder Selection)
Chapter 5