CV500-MC221 Omron, CV500-MC221 Datasheet - Page 50

• Manufacturer Part Number: CV500-MC221
• Description: SERVO CONTROL MODULE
• Manufacturer: Omron

Specifications of CV500-MC221

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5-7
Note 1. When bit No. 0 of the set up parameter No. 1 is set to “1,” there is no need to select [Servo On]
1. Opening the Jog Operation Window
2. Selecting [Servo On] (See note 1.)
3. Selecting Rotation Direction (Refer to the next section to change jog speed)
4. Rotating the Motor
5. Selecting [Servo Off] (See note 2.)
6. Closing the Jog Operation window
Operating Jog
Jog Operation window opens.
[Run] is displayed.
Click on [Servo On].
Select [Servo On] using the Tab Key. Press the Space Key or Return Key.
Click on [Forward] or [Reverse].
Select [Forward] or [Reverse] using the Tab Key.
Click on [Forward] or [Reverse]. The mouse toggle function allows switching between Forward
and Reverse.
Select [Forward] or [Reverse], and press the Space Key. The Space Key toggle function allows
switching between Forward and Reverse. When repeating the toggle function, the motor may
stop momentarily. This is caused by a momentary interruption in the command input.
Click on [Servo Off].
Select [Servo Off] using the Tab Key. Press the Space Key or Return Key.
Click on [
Press the Escape Key.
Jog speed enables normal or reverse motor rotation.
Jog Operation
Click on or select [Jog] -- [Jog Operation].
because the Servo Driver is normally in servo on status. The situation is the same when the
RUN signal is input (ON) from outside.

] in the upper-left part of the window.
HA/LA, UT, UE
Chapter 5