CV500-MC221 Omron, CV500-MC221 Datasheet - Page 56

• Manufacturer Part Number: CV500-MC221
• Description: SERVO CONTROL MODULE
• Manufacturer: Omron

Specifications of CV500-MC221

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2. Turning the Servo ON
3. Setting the Voltage of Speed Command Input to 0 V
4. Setting the Direction that Provides Offset
5. Adjusting Offset
6. Closing the Speed Command Manual Zero Adjustment Window
Speed Command Manual Zero Adjustment window opens.




Input the Run signal (ON). When bit No. 0 of setup parameter No. 1 is set to “1,” this operation is not
required.
Type voltage of speed command input (REF) with which the number of rotations becomes zero
(normally 0 V).
Select [Up] (providing offset on positive side) or [Down] (providing offset on negative side).
Adjust the offset so that motor or machine stops completely.
Move the mouse cursor over [Up] or [Down].
Select [Up] or [Down] using the Tab Key.
Click on [Up] or [Down]. The offset value increases or decreases by 1 for every click.
Press the Space Key. The offset value increases or decreases by 1 each time the Space Key is
pressed.
Click on [ ] in the upper-left part of the window.
Press the Escape Key.
Chapter 5