CV500-MC221 Omron, CV500-MC221 Datasheet - Page 57

• Manufacturer Part Number: CV500-MC221
• Description: SERVO CONTROL MODULE
• Manufacturer: Omron

Specifications of CV500-MC221

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Caution When 12 bit Absolute Encoder Alarm Reset is performed, never fail to reset to the home posi-
Note 1. When 12 bit Absolute Encoder Alarm Reset is performed, the number of rotations of the Abso-
Note 2. 12 bit Absolute Encoder Alarm Reset is used for resetting the following events from the IBM
1. Selecting [Adjust] -- [12 bit Absolute Encoder Alarm Reset]
2. Do You Want to Perform Setup?
12 bit Absolute Encoder Setup Method
Warning window opens.
a) Select [Cancel]
Warning window closes.
Click on [Cancel].
Press the Escape Key.
This function is used to reset alarms (A.81, A.82) relating to the Absolute Encoder.
In addition, it is valid when the following conditions are met.
Click on or select [Adjust] -- [12 bit Absolute Encoder Alarm Reset].
lute Encoder is reset to 0. If the machine system is operated without resetting its home posi-
tion, it will be positioned at a location different than originally intended. This situation, there-
fore, is very dangerous.
PC/AT or compatible:
These events originate from the Encoder.
tion. Otherwise, injury or machine damage may occur.
Servo Driver model is R88-UA
Starting of the Computer Monitor Software or Servo Driver selection.
Selection is performed under condition that the Absolute Encoder has been set
for the setup parameters.
A.81 Encoder Backup Alarm
A.82 Encoder Checksum Error



HA/LA
HA/LA
Chapter 5