W352-E1-06 Omron, W352-E1-06 Datasheet - Page 14

• Manufacturer Part Number: W352-E1-06
• Description: Product Manual
• Manufacturer: Omron

Application Precautions
• Do not apply voltages to the input terminals in excess of the rated input voltage.
• Do not apply voltages or connect loads to the output terminals in excess of the
• Disconnect the functional ground terminal when performing withstand voltage
• Install the Unit properly as specified in the operation manual. Improper installa-
• Be sure that all the mounting screws, terminal screws, and cable connector
• Be sure to leave the labels attached at the time of shipment on the CPM1 or
• Remove the label after the completion of wiring to ensure proper heat dissipa-
• Be sure to perform wiring in accordance with the relevant operation manual.
• Use crimp terminals for wiring. Do not connect bare stranded wires directly to
• Double-check all the wiring before turning ON the power supply. Incorrect wir-
• Be sure that the terminal blocks, expansion cables, and other items with lock-
• Be sure that terminal blocks and connectors are connected in the specified di-
• Check the user program for proper execution before actually running it on the
• Confirm that no adverse effect will occur in the system before attempting any of
• Resume operation only after transferring to the new CPU Unit the contents of
• Do not pull on the cables or bend the cables beyond their natural limit. Doing
• Do not place objects on top of the cables. Doing so may break the cables.
• Do not short the battery terminals or charge, disassemble, heat, or incinerate
• When replacing parts, be sure to confirm that the rating of a new part is correct.
• Before touching the Unit, be sure to first touch a grounded metallic object in
• Do not touch the expansion I/O connecting cable while the power is being sup-
Excess voltages may result in burning.
maximum switching capacity. Excess voltage or loads may result in burning.
tests. Not disconnecting the functional ground terminal may result in burning.
tion of the Unit may result in malfunction.
screws are tightened to the torque specified in the relevant manuals. Incorrect
tightening torque may result in malfunction.
CPM2A when wiring in order to prevent wiring cuttings from entering the Unit.
tion. Leaving the label attached may result in malfunction.
Incorrect wiring may result in burning.
terminals. Connection of bare stranded wires may result in burning.
ing may result in burning.
ing devices are properly locked into place. Improper locking may result in mal-
function.
rection with the correct polarity. Not doing so may result in malfunction.
Unit. Not checking the program may result in an unexpected operation.
the following. Not doing so may result in an unexpected operation.
the DM and HR Areas required for resuming operation. Not doing so may result
in an unexpected operation.
either of these may break the cables.
the battery. Do not subject the battery to strong shocks. Doing any of these
may result in leakage, rupture, heat generation, or ignition of the battery. Dis-
pose of any battery that has been dropped on the floor or otherwise subjected
to excessive shock. Batteries that have been subjected to shock may leak if
they are used.
Not doing so may result in malfunction or burning.
order to discharge any static build-up. Not doing so may result in malfunction or
damage.
plied in order to prevent any malfunction due to static electricity.
• Changing the operating mode of the PC.
• Force-setting/force-resetting any bit in memory.
• Changing the present value of any word or any set value in memory.
xv
5