W352-E1-06 Omron, W352-E1-06 Datasheet - Page 90

• Manufacturer Part Number: W352-E1-06
• Description: Product Manual
• Manufacturer: Omron

Wiring and Connections
Transistor Output Wiring (Sinking)
Output Configurations
!
Caution
Note Refer to Section 3 Memory Areas in the Programming Manual (W353) for details
Wire the outputs to the CPM2A’s CPU Unit and Expansion I/O Units as shown in
the following diagrams.
• Always use single wire or attach crimp terminals if a stranded wire is used.
• Don’t exceed the output capacity or the maximum common current. Refer to
on the allocation of output bits in CPM2A PCs.
Double-check the polarity of the power supply for the load before turning it ON. If
the polarity is reversed, the load may malfunction or internal components may
be damaged.
CPM2A-20CDT-D
Terminals 00 through 07 of “10CH” correspond to IR 01000 through IR 01007.
CPM2A-30CDT-D
Terminals 00 through 07 of “10CH” correspond to IR 01000 through IR 01007.
Terminals 00 through 03 of “11CH” correspond to IR 01100 through IR 01103.
2-1-3 I/O Specifications for details.
Output capacity
Max. common capacity
Item
4.5 to
30 VDC
4.5 to
30 VDC
4.5 to
30 VDC
4.5 to
30 VDC
OUT01000 and OUT01001: 200 mA (30 VDC)
OUT01002 and up: 300 mA (30 VDC)
0.8 A/common
4.5 to
30 VDC
4.5 to
30 VDC
4.5 to 30 VDC
4.5 to 30 VDC
Specification
4.5 to 30 VDC
Section 3-4
71