W352-E1-06 Omron, W352-E1-06 Datasheet - Page 55

• Manufacturer Part Number: W352-E1-06
• Description: Product Manual
• Manufacturer: Omron

Specifications
Transistor Outputs (Sinking or Sourcing)
36
Max.
switching
capacity
capacity
Leakage
current
Residual
voltage
ON
delay
OFF
delay
Fuse
Circuit
configura
tion
Item
OUT01000 and OUT01001:
OUT01002 and up:
0.8 A/common
1.6 A/Unit
(See note 2.)
0.1 mA max.
1.5 V max.
OUT01000 and OUT01001:
OUT01002 and up:
OUT01000 and OUT01001:
OUT01002 and up:
1 fuse/output (cannot be replaced by user)
Sinking Outputs
20CDT1-D
20CDT-D
Output LED
Internal
circuits
!
Caution
Note
0.8 A/common
2.4 A/Unit
(See note 2.)
30CDT1-D
30CDT-D
Do not apply voltage in excess of the maximum switching capacity to an output
terminal. It may result in damage to the product or fire.
1. When using OUT01000 or OUT01001 as a pulse output, connect a dummy
2. The total for OUT01000 to OUT 01003 must be 0.8 A maximum. If the ambi-
OUT
OUT
COM (–)
resistor as required to bring the load current between 0.01 and 0.1 A. If the
load current is below 0.1 A, the ON-to-OFF response time will be longer and
high-speed pulses (source-type transistor outputs) will not be output. If the
load current is above 0.1 A, the transistor will generate more heat and com-
ponents may be damaged.
ent temperature is maintained below 50 °C, however, up to 0.9 A/common
can be used.
4.5 to 30 VDC, 0.2 A/output (See note 1.)
4.5 to 30 VDC, 0.3 A/output
20 µs max.
0.1 ms max.
40 µs max. for 4.5 to 26.4 V, 10 to 100 mA
0.1 ms max. for 4.5 to 30 V, 10 to 200 mA
1 ms max.
24 VDC/4.5 to 30 VDC
0.8 A/common
3.2 A/Unit
(See note 2.)
40CDT1-D
40CDT-D
Sourcing Outputs
Specification
Output LED
Internal
circuits
0.8 A/common
4.8 A/Unit
(See note 2.)
60CDT1-D
60CDT-D
OUT
OUT
COM (+)
0.9 A/common
1.8 A/Unit
(See note 2.)
24 VDC/4.5 to 30 VDC
8ET1
8ET
24 VDC
0.3 A/output
0.9 A/common
1.8 A/Unit
0.1 ms max.
1 ms max.
(24 VDC
5 to 300 mA)
1 fuse/common
(cannot be
replaced by user)
Section 2-1
20EDT1
20EDT
+10%
+10%
/
/
–5%
–5%
,
,