KSZ8851-16MLL Micrel Inc, KSZ8851-16MLL Datasheet - Page 45

• Manufacturer Part Number: KSZ8851-16MLL
• Description: Single Ethernet Port + Generic (16-bit) Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8851-16MLL

• Controller Type: Ethernet Controller, MAC/PHY
• Interface: Bus
• Voltage - Supply: 1.8V, 2.5V, 3.3V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-3292 - BOARD EVALUATION KSZ8851-16MLL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3252

The value of the CRC calculated is based on the IEEE 802.3 Ethernet standard, it is taken over the bytes specified in
the wake up byte mask registers.
Wakeup Frame 1 Byte Mask 0 Register (0x44 – 0x45): WF1BM0
This register contains the first 16 bytes mask values of the Wake up frame 1 pattern. Setting bit 0 selects the first byte
of the Wake up frame 1, setting bit 15 selects the 16th byte of the Wake up frame 1.
Wakeup Frame 1 Byte Mask 1 Register (0x46 – 0x47): WF1BM1
This register contains the next 16 bytes mask values of the Wake up frame 1 pattern. Setting bit 0 selects the 17th byte
of the Wake up frame 1. Setting bit 15 selects the 32nd byte of the Wake up frame 1.
Wakeup Frame 1 Byte Mask 2 Register (0x48 – 0x49): WF1BM2
This register contains the next 16 bytes mask values of the Wake up frame 1 pattern. Setting bit 0 selects the 33rd byte
of the Wake up frame 1. Setting bit 15 selects the 48th byte of the Wake up frame 1.
Wakeup Frame 1 Byte Mask 3 Register (0x4A – 0x4B): WF1BM3
This register contains the last 16 bytes mask values of the Wake up frame 1 pattern. Setting bit 0 selects the 49th byte
of the Wake up frame 1. Setting bit 15 selects the 64th byte of the Wake up frame 1.
0x4C – 0x4F: Reserved
Wakeup Frame 2 CRC0 Register (0x50 – 0x51): WF2CRC0
This register contains the expected CRC values of the Wake up frame 2 pattern.
The value of the CRC calculated is based on the IEEE 802.3 Ethernet standard, it is taken over the bytes specified in
the wake up byte mask registers.
August 2009
Micrel, Inc.
Bit
15-0
Bit
15-0
Bit
15-0
Bit
15-0
Bit
15-0
Bit
15-0
Default Value
0x0000
Default Value
0x0000
Default Value
0x0000
Default Value
0x0000
Default Value
0x0000
Default Value
0x0000
R/W
RW
R/W
RW
R/W
RW
R/W
RW
R/W
RW
R/W
RW
Description
WF1CRC1
Wake-up frame 1 CRC (upper 16 bits).
The expected CRC value of a Wake-up frame 1 pattern.
Description
WF1BM0
Wake-up frame 1 Byte Mask 0.
The first 16 bytes mask of a Wake-up frame 1 pattern.
Description
WF1BM1
Wake-up frame 1 Byte Mask 1.
The next 16 bytes mask covering bytes 17 to 32 of a Wake-up frame 1 pattern.
Description
WF1BM2
Wake-up frame 1 Byte Mask 2.
The next 16 bytes mask covering bytes 33 to 48 of a Wake-up frame 1 pattern.
Description
WF1BM3
Wake-up frame 1 Byte Mask 3.
The last 16 bytes mask covering bytes 49 to 64 of a Wake-up frame 1 pattern.
Description
WF2CRC0
Wake-up frame 2 CRC (lower 16 bits). The expected CRC value of a Wake-up frame 2
pattern.
45
KSZ8851-16MLL/MLLI
M9999-083109-2.0