DS21455 Maxim Integrated Products, DS21455 Datasheet - Page 174

• Manufacturer Part Number: DS21455
• Description: Network Controller & Processor ICs Quad E1-T1-J1 Single -Chip Transceiver (S
• Manufacturer: Maxim Integrated Products

Specifications of DS21455

• Product: Framer
• Number Of Transceivers: 4
• Data Rate: 64 Kbps
• Supply Voltage (max): 3.465 V
• Supply Voltage (min): 3.135 V
• Supply Current (max): 328 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Package / Case: BGA

Figure 25-6. Software-Selected Termination, Longitudinal Protection
Table 25-7. Component List (Software-Selected Termination, Longitudinal
Protection)
100/110/120 Ω
Twisted Pair
100/110/120 Ω
Twisted Pair
Design Notes:
1
2
Choke is optional but should be included when necessary for common mode noise reduction.
Decoupling capacitors need to be placed near device power pins
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
S3, S4, S5, S6
T1 and T2
T3 and T4
S1 and S2
S7 and S8
F1 to F4
NAME
F1
F2
F3
F4
T3 and T4 are optional. For more information, contact the Telecom Support Group at
[e-mail].
A list of alternate transformer part numbers and manufacturers is available at
[e-mail].
The layout from the transformers to the network interface is critical. Traces should be at least 25
mils wide and separated from other circuit lines by at least 150 mils. The area under this portion
of the circuit should not contain power planes.
Some T1 (never in E1) applications source or sink power from the network-side center taps of
the Rx/Tx transformers.
The ground trace connected to the S2/S3 pair and the S4/S5 pair should be at least 50 mils wide
to conduct the extra current from a longitudinal power-cross event.
1.25A slow blow fuse
25V (max) transient suppressor
180V (max) transient suppressor
40V (max) transient suppressor
Transformer 1:1CT and 1:2CT (3.3V, SMT)
Dual common-mode choke (SMT)
S7
S8
S3
S4
S5
S6
T3
T4
1
1
2:1
1:1
T2
T1
DESCRIPTION
174 of 270
60 Ω
S1
S2
1.0 µF
0.1 µF
60 Ω
TTIP
TRING
RTIP
RRING
Dallas Semiconductor
T1/E1/J1 SCT or LIU
DVDD
DVSS
TVDD
TVSS
RVDD
RVSS
0.01 µF
0.1 µF
0.1 µF
2
2
2
VCC
VCC
VCC
0.1 µF
68 µF
2
2