MPC8536DS Freescale, MPC8536DS Datasheet - Page 122
![no-image](/images/manufacturer_photos/0/2/261/freescale_sml.jpg)
MPC8536DS
Manufacturer Part Number
MPC8536DS
Description
Manufacturer
Freescale
Datasheet
1.MPC8536DS.pdf
(128 pages)
Specifications of MPC8536DS
Lead Free Status / RoHS Status
Compliant
- Current page: 122 of 128
- Download datasheet (2Mb)
Guidelines for High-Speed Interface Termination
The following pins must be connected to XGND if not used:
3.11.3
If the high-speed SerDes 2 interface (SGMII/ SATA) is not used at all, the unused pin should be terminated as described in this
section. See SerDes2 in
The following pins must be left unconnected (float):
The following pins must be connected to X2GND:
The POR configuration pin cfg_srds2_prtcl[0:2] on TSEC1_TXD[2], TSEC3_TXD[2], TSEC_1588_PUSLE_OUT1 can be
used to power down SerDes 2 block for power saving. Note that both S2VDD and X2VDD must remain powered.
3.11.4
If only part of the high speed SerDes 2 (SGMII/SATA) interface pins are used, the remaining high-speed serial I/O pins should
be terminated as described in this section.
The following pins must be left unconnected (float) if not used:
The following pins must be connected to X2GND if not used:
4
Ordering information for the parts fully covered by this specification document is provided in
Addressed by This
122
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SD1_RX[7:0]
SD1_RX[7:0]
SD1_REF_CLK
SD1_REF_CLK
SD2_TX[1:0]
SD2_TX[1:0]
Reserved pins L8, L9
SD2_RX[1:0]
SD2_RX[1:0]
SD2_REF_CLK
SD2_REF_CLK
SD2_TX[1:0]
SD2_TX[1:0]
Reserved pins: T22, T23
SD2_RX[1:0]
SD2_RX[1:0]
Ordering Information
SerDes 2 Interface Entirely Unused
SerDes 2 Interface Partly Unused
MPC8536E PowerQUICC™ III Integrated Processor Hardware Specifications, Rev. 2
Document.”
Table 1
for details.
Section 4.1, “Part Numbers Fully
Freescale Semiconductor