ICS1892YT IDT, Integrated Device Technology Inc, ICS1892YT Datasheet - Page 76
![no-image](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_sml.jpg)
ICS1892YT
Manufacturer Part Number
ICS1892YT
Description
Manufacturer
IDT, Integrated Device Technology Inc
Datasheet
1.ICS1892YT.pdf
(148 pages)
Specifications of ICS1892YT
Lead Free Status / RoHS Status
Not Compliant
- Current page: 76 of 148
- Download datasheet (690Kb)
8.6.2 IEEE Reserved Bit (bit 4.14)
8.6.3 Remote Fault (bit 4.13)
8.6.4 Technology Ability Field (bits 4.12:5)
ICS1892, Rev. D, 2/26/01
The ISO/IEC specification reserves this bit for future use. However, the ISO/IEC Standard also defines bit
4.14 as the Acknowledge bit.
When this reserved bit is read by an STA, the ICS1892 returns a logic zero. However, whenever an STA
writes to this reserved bit, it must use the default value specified in this data sheet. ICS uses some of these
reserved bits to invoke auxiliary functions. To ensure proper operation of the ICS1892, an STA must
maintain the default value of these bits. Therefore, ICS recommends that an STA always write the default
value of any reserved bits during all management register write operations.
Reserved bit 4.14 is a Command Override Write (CW) bit. Whenever bit 16.15 (the Command Register
Override bit) is logic:
•
•
When the ICS1892 Auto-Negotiation sublayer is enabled, the ICS1892 transmits the Remote Fault bit 4.13
to its remote link partner during the auto-negotiation process. The Remote Fault bit is part of the Link Code
Word that the ICS1892 exchanges with its remote link partner. The ICS1892 sets this bit to logic one
whenever it detects a problem with the link, locally. This data is sent to the remote link partner to inform it
of the potential problem. If the ICS1892 does not detect a link fault, it clears bit 4.13 to logic zero.
Whenever the ICS1892:
•
•
When its Auto-Negotiation sublayer is enabled, the ICS1892 transmits its link capabilities to its remote link
partner during the auto-negotiation process. The Technology Ability Field (TAF) bits 4.12:5 determine the
specific abilities that the ICS1892 advertises. The ISO/IEC specification defines the TAF technologies in
Annex 28B.
The ISO/IEC specification reserves bits 4.12:10 for future use. When each of these reserved bits is:
•
•
ICS uses some of these reserved bits to invoke auxiliary functions. To ensure proper operation of the
ICS1892, an STA must maintain the default value of these bits. Therefore, ICS recommends that an STA
always write the default value of any reserved bits during all management register write operations.
Reserved bits 4.12:10 are Command Override Write (CW) bits. Whenever bit 16.15 (the Command
Register Override bit) is logic: See para 8.1.2
•
•
Each of the bits 4.9:5 in the TAF represent a specific technology capability. When one of these bits is logic:
•
•
With the exception of bit 4.9, the default settings of the TAF bits depend on the ICS1892 operating mode.
Bit 4.9 is always logic zero, indicating that the ICS1892 cannot support 100Base-T4 operations.
Zero, the ICS1892 isolates all STA writes to bit 4.14.
One, an STA can modify the value of bit 4.14.
Does not detect a link fault, the ICS1892 clears bit 4.13 to logic zero.
Detects a problem with the link, during the auto-negotiation process, this bit is set. As a result, the data
on this bit is sent to the remote link partner to inform it of the potential problem.
Read by an STA, the ICS1892 returns a logic zero
Written to by an STA, the STA must use the default value specified in this data sheet.
Zero, the ICS1892 isolates all STA writes to CW bits, including bits 4.12:10.
One, an STA can modify the value of bits 4.12:10
Zero, it indicates to the remote link partner that the local device cannot support the technology
represented by the bit.
One, it indicates to the remote link partner that the local device can support the technology.
ICS1892 Data Sheet
© 2000-2001, Integrated Circuit Systems, Inc.
All rights reserved.
76
Chapter 8 Management Register Set
February 26, 2001
Related parts for ICS1892YT
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![IDT77010L155PQF](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
TRANSLATION DEVICE DPI 80-PQFP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![IDT74FCT162244ATPA](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IDT PART
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![IDT82P5088BBG](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC LIU T1/E1/J1 OCTAL 256PBGA
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![ICS9FG104DGILFT](/photos/6/49/64969/ics9fg104dgilft_tmb.jpg)
Part Number:
Description:
IC FREQ TIMING GENERATOR 28TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![ICS95V857AKLF](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC CLK DVR PLL 1:10 40VFQFPN
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![MPC9109AC](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC CLK FANOUT BUFFER 1:18 32LQFP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![MPC940LAC](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC CLK FANOUT BUFFER 1:18 32LQFP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![ICS9LPRS525AGILF](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC CK505 VREG/RES 56TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![IDTCSPT857CPAG](/photos/6/50/65023/idtcspt857cpag_tmb.jpg)
Part Number:
Description:
IC SDRAM CLK DVR 1:10 48-TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![ICS95V857AGLF](/photos/6/50/65024/ics95v857aglf_tmb.jpg)
Part Number:
Description:
IC CLK DVR PLL 1:10 48TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![IDTCV133PAG](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC FLEXPC CLK PROGR P4 56-TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![IDTCV115-2PV](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC FLEXPC CLK PROGR P4 56-TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![IDTCV123PV](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC FLEXPC CLK PROGR P4 56-SSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![IDTCSPT855PGG](/photos/31/26/312654/28pin_tssop_ep_tmb.jpg)
Part Number:
Description:
IC PLL CLK DRIVER 2.5V 28-TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet:
![ICS95V847AG](/images/manufacturer_photos/0/3/324/idt__integrated_device_technology_inc_tmb.jpg)
Part Number:
Description:
IC CLOCK DRIVER 2.5V 24-TSSOP
Manufacturer:
IDT, Integrated Device Technology Inc
Datasheet: