PIC18LF27J13T-I/SO Microchip Technology, PIC18LF27J13T-I/SO Datasheet - Page 116

• Manufacturer Part Number: PIC18LF27J13T-I/SO
• Description: 28-pin, GP, 128KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC 28 SOIC .300in T/R
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF27J13T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 2.75 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

location just programmed should be verified and
PIC18F47J13 FAMILY
7.5.3
Depending on the application, good programming
practice may dictate that the value written to the
memory should be verified against the original value.
This should be used in applications where excessive
writes can stress bits near the specification limit.
7.5.4
If a write is terminated by an unplanned event, such as
loss of power or an unexpected Reset, the memory
TABLE 7-2:
DS39974A-page 116
TBLPTRU
TBPLTRH
TBLPTRL
TABLAT
INTCON
EECON2
EECON1
Legend: — = unimplemented, read as ‘0’. Shaded cells are not used during Flash program memory access.
Name
WRITE VERIFY
UNEXPECTED TERMINATION OF
WRITE OPERATION
Program Memory Table Pointer High Byte (TBLPTR<15:8>)
Program Memory Table Pointer Low Byte (TBLPTR<7:0>)
Program Memory Table Latch
Program Memory Control Register 2 (not a physical register)
GIE/GIEH
Bit 7
REGISTERS ASSOCIATED WITH PROGRAM FLASH MEMORY
—
—
PEIE/GIEL
Bit 6
—
—
WPROG
TMR0IE
bit 21
Bit 5
Program Memory Table Pointer Upper Byte (TBLPTR<20:16>)
Preliminary
INT0IE
FREE
Bit 4
reprogrammed if needed. If the write operation is
interrupted by a MCLR Reset, or a WDT time-out Reset
during normal operation, the user can check the
WRERR bit and rewrite the location(s) as needed.
7.6
See Section 27.6 “Program Verification and Code
Protection” for details on code protection of Flash
program memory.
WRERR
RBIE
Bit 3
Flash Program Operation During
Code Protection
TMR0IF
WREN
Bit 2
 2010 Microchip Technology Inc.
INT0IF
Bit 1
WR
RBIF
Bit 0
—