ICS9DB803DGILFT IDT, Integrated Device Technology Inc, ICS9DB803DGILFT Datasheet - Page 16

• Manufacturer Part Number: ICS9DB803DGILFT
• Description: IC BUFFER 8OUTPUT DIFF 48-TSSOP
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Clock Bufferr

Specifications of ICS9DB803DGILFT

• Input: HCSL
• Output: HCSL, LVDS
• Frequency - Max: 400MHz
• Voltage - Supply: 3.135 V ~ 3.465 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-TSSOP
• Frequency-max: 400MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 800-1251-2; 9DB803DGILFT

Note: Polarities in timing diagrams are shown OE_INV = 0. They are similar to OE_INV = 1.
PD#, Power Down
The PD# pin cleanly shuts off all clocks and places the device into a power saving mode. PD# must be asserted before shutting
off the input clock or power to insure an orderly shutdown. PD is asynchronous active-low input for both powering down the
device and powering up the device. When PD# is asserted, all clocks will be driven high, or tri-stated (depending on the PD#
drive mode and Output control bits) before the PLL is shut down.
PD# Assertion
When PD# is sampled low by two consecutive rising edges of DIF#, all DIF outputs must be held High, or tri-stated (depending
on the PD# drive mode and Output control bits) on the next High-Low transition of the DIF# outputs. When the PD# drive mode
bit is set to ‘0’, all clock outputs will be held with DIF driven High with 2 x I
set to ‘1’, both DIF and DIF# are tri-stated.
PD# De-assertion
Power-up latency is less than 1 ms. This is the time from de-assertion of the PD# pin, or VDD reaching 3.3V, or the time from
valid SRC_IN clocks until the time that stable clocks are output from the device (PLL Locked). If the PD# drive mode bit is set
to ‘1’, all the DIF outputs must driven to a voltage of >200 mV within 300 us of PD# de-assertion.
IDT
ICS9DB803DI
Eight Output Differential Buffer for PCIe for Gen 2
TM
/ICS
TM
Eight Output Differential Buffer for PCIe Gen 2
PWRDWN#
PWRDWN#
DIF#
DIF#
DIF
DIF
Tstable
<1mS
<300uS, >200mV
Tdrive_PwrDwn#
16
REF
and DIF# tri-stated. If the PD# drive mode bit is
ICS9DB803DI
REV A 06/18/08