804-1260 XANTREX TECHNOLOGY, 804-1260 Datasheet - Page 13

• Manufacturer Part Number: 804-1260
• Description: 60A-12V TRUECHARGE 2 SERIES BATTERIE CHARGER XANTREX
• Manufacturer: XANTREX TECHNOLOGY

Specifications of 804-1260

• Battery Charger Type: Switch Mode
• Battery Technologies Supported: Lead Acid
• Supply Voltage: 265VAC
• Charge Current Max: 60A

BATTERY CHARGER LOCATION
975-0402-01-01
This guide for use by qualified installers only
14. For flooded non-sealed batteries, add distilled water in
15. Locate the Truecharge™ 2 Battery Charger unit away
16. Never place the Truecharge™ 2 Battery Charger unit
17. Never allow battery acid to drip on the charger when
18. Do not operate the charger in a closed in area, or restrict
19. Do not place a battery on top of the charger.
20. For North American marine installations, external
each cell until battery acid reaches the level specified by
the battery manufacturer. This helps to purge excessive
gas from cells. Do not overfill. For a battery without
removable cell caps, carefully follow manufacturer's
instructions.
from batteries in a well ventilated compartment.
directly above batteries; gases from a battery will corrode
and damage the charger
reading gravity, or filling battery.
the ventilation in any way.
connections to the charger shall comply with the United
States Coast Guard Electrical Regulations (33CFR183,
Sub Part I).
Safety
xi