804-1260 XANTREX TECHNOLOGY, 804-1260 Datasheet - Page 18

• Manufacturer Part Number: 804-1260
• Description: 60A-12V TRUECHARGE 2 SERIES BATTERIE CHARGER XANTREX
• Manufacturer: XANTREX TECHNOLOGY

Specifications of 804-1260

• Battery Charger Type: Switch Mode
• Battery Technologies Supported: Lead Acid
• Supply Voltage: 265VAC
• Charge Current Max: 60A

Introduction
Standard and Protection Features
The Truecharge™ 2 Battery Charger provides the following
standard features:
The Truecharge™ 2 Battery Charger provides the following
protection features:
1–2
1.Model TC1012 has one output and model TC1512 has two outputs. All other models
have three outputs. Each output (for models with 2 or 3 outputs) can charge different bat-
teries that either have the same chemistry or can tolerate the same charge sequence.
2.The charger can be programmed with custom charge setpoints using PC interface. This
programming can only be done using a special configuration tool operated by Xantrex or a
designated OEM.
3.The charger can initiate charging a non-damaged but zero voltage battery.
This guide for use by qualified installers only
•
•
•
•
•
•
•
•
•
•
•
•
•
•
three
battery monitoring functions while in float mode or rest
mode
correct charging voltage for batteries when connected to
almost any single phase AC power outlet in the world
low electromagnetic interference (EMI)
automatic charge resumption, if required, after AC power
interruption
programmable custom charge settings
fully discharged battery charging
battery reverse polarity protection via a replaceable
output fuse
AC input out-of-range derating and shutdown
ambient over temperature derating and shutdown
battery over-charging protection
electronic current limiting provides protection against
short circuit conditions on the charger’s output
ignition protected rating, enabling installation in engine
spaces
isolated design
1
full current rated outputs
3
2
975-0402-01-01