EPM570F256I5N Altera, EPM570F256I5N Datasheet - Page 44

• Manufacturer Part Number: EPM570F256I5N
• Description: IC MAX II CPLD 570 LE 256-FBGA
• Manufacturer: Altera
• Series: MAX® IIr

Specifications of EPM570F256I5N

• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 5.4ns
• Voltage Supply - Internal: 2.5V, 3.3V
• Number Of Logic Elements/blocks: 570
• Number Of Macrocells: 440
• Number Of I /o: 160
• Operating Temperature: -40°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 256-FBGA
• Voltage: 2.5V, 3.3V
• Memory Type: FLASH
• Number Of Logic Elements/cells: 570
• Family Name: MAX II
• # Macrocells: 440
• Frequency (max): 1.8797GHz
• Propagation Delay Time: 8.7ns
• Number Of Logic Blocks/elements: 57
• # I/os (max): 160
• Operating Supply Voltage (typ): 2.5/3.3V
• In System Programmable: Yes
• Operating Supply Voltage (min): 2.375V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 256
• Package Type: FBGA
• No. Of I/o's: 160
• Propagation Delay: 8.7ns
• Global Clock Setup Time: 1.9ns
• Frequency: 201.1MHz
• Supply Voltage Range: 2.375V To 2.625V, 3V To 3.6V
• Operating Temperature Range: -40°C To +100°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-1399; EPM570F256I5N

3–2
Table 3–1. MAX II JTAG Instructions (Part 2 of 2)
Table 3–3. 32-Bit MAX II Device IDCODE (Part 1 of 2)
MAX II Device Handbook
CLAMP
USER0
USER1
IEEE 1532
instructions
Notes to
(1) HIGHZ, CLAMP, and EXTEST instructions do not disable weak pull-up resistors or bus hold features.
(2) These instructions are shown in the 1532 BSDL files, which will be posted on the Altera
EPM240
EPM240G
EPM570
EPM570G
EPM1270
EPM1270G
EPM2210
EPM2210G
Device
JTAG Instruction
Table
(1)
3–1:
w
Version
(4 Bits)
0000
0000
0000
0000
Unsupported JTAG instructions should not be issued to the MAX II device as this may
put the device into an unknown state, requiring a power cycle to recover device
operation.
The MAX II device instruction register length is 10 bits and the USERCODE register
length is 32 bits.
device IDCODE information for MAX II devices.
Table 3–2. MAX II Boundary-Scan Register Length
EPM240
EPM570
EPM1270
EPM2210
00 0000 1010
00 0000 1100
00 0000 1110
Instruction Code
Device
0010 0000 1010 0001
0010 0000 1010 0010
0010 0000 1010 0011
0010 0000 1010 0100
(2)
Part Number
Table 3–2
Binary IDCODE (32 Bits)
and
Places the 1-bit bypass register between the TDI and TDO pins,
which allows the boundary scan test data to pass synchronously
through selected devices to adjacent devices during normal device
operation, while holding I/O pins to a state defined by the data in the
boundary-scan register.
This instruction allows you to define the scan chain between TDI
and TDO in the MAX II logic array. This instruction is also used for
custom logic and JTAG interfaces.
This instruction allows you to define the scan chain between TDI
and TDO in the MAX II logic array. This instruction is also used for
custom logic and JTAG interfaces.
IEEE 1532 ISC instructions used when programming a MAX II device
via the JTAG port.
Boundary-Scan Register Length
Table 3–3
000 0110 1110
000 0110 1110
000 0110 1110
000 0110 1110
Identity (11 Bits)
Manufacturer
(1)
show the boundary-scan register length and
240
480
636
816
®
website at
Chapter 3: JTAG and In-System Programmability
IEEE Std. 1149.1 (JTAG) Boundary-Scan Support
Description
www.altera.com
(1 Bit)
© October 2008 Altera Corporation
LSB
1
1
1
1
(2)
when they are available.
0x020A10DD
0x020A20DD
0x020A30DD
0x020A40DD
HEX IDCODE