EPM570F256I5N Altera, EPM570F256I5N Datasheet - Page 60

• Manufacturer Part Number: EPM570F256I5N
• Description: IC MAX II CPLD 570 LE 256-FBGA
• Manufacturer: Altera
• Series: MAX® IIr

Specifications of EPM570F256I5N

• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 5.4ns
• Voltage Supply - Internal: 2.5V, 3.3V
• Number Of Logic Elements/blocks: 570
• Number Of Macrocells: 440
• Number Of I /o: 160
• Operating Temperature: -40°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 256-FBGA
• Voltage: 2.5V, 3.3V
• Memory Type: FLASH
• Number Of Logic Elements/cells: 570
• Family Name: MAX II
• # Macrocells: 440
• Frequency (max): 1.8797GHz
• Propagation Delay Time: 8.7ns
• Number Of Logic Blocks/elements: 57
• # I/os (max): 160
• Operating Supply Voltage (typ): 2.5/3.3V
• In System Programmable: Yes
• Operating Supply Voltage (min): 2.375V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 256
• Package Type: FBGA
• No. Of I/o's: 160
• Propagation Delay: 8.7ns
• Global Clock Setup Time: 1.9ns
• Frequency: 201.1MHz
• Supply Voltage Range: 2.375V To 2.625V, 3V To 3.6V
• Operating Temperature Range: -40°C To +100°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-1399; EPM570F256I5N

5–2
Recommended Operating Conditions
Table 5–2. MAX II Device Recommended Operating Conditions
MAX II Device Handbook
V
V
V
V
T
Notes to
(1) MAX II device in-system programming and/or user flash memory (UFM) programming via JTAG or logic array is not guaranteed outside the
(2) Minimum DC input is –0.5 V. During transitions, the inputs may undershoot to –2.0 V for input currents less than 100 mA and periods shorter
(3) During transitions, the inputs may overshoot to the voltages shown in the following table based upon input duty cycle. The DC case is equivalent
(4) All pins, including clock, I/O, and JTAG pins, may be driven before V
(5) For the extended temperature range of 100 to 125º C, MAX II UFM programming (erase/write) is only supported via the JTAG interface. UFM
J
CCINT
CCIO
I
O
Symbol
recommended operating conditions (for example, if brown-out occurs in the system during a potential write/program sequence to the UFM,
users are recommended to read back UFM contents and verify against the intended write data).
than 20 ns.
to 100% duty cycle. For more information about 5.0-V tolerance, refer to the
MAX II Device Handbook.
V
4.0 V
4.1
4.2
4.3
4.4
4.5
programming via the logic array interface is not guaranteed in this range.
(1)
IN
(1)
Table
Max. Duty Cycle
100% (DC)
17%
90%
50%
30%
10%
3.3-V supply voltage for internal logic and
ISP
2.5-V supply voltage for internal logic and
ISP
1.8-V supply voltage for internal logic and
ISP
Supply voltage for I/O buffers, 3.3-V
operation
Supply voltage for I/O buffers, 2.5-V
operation
Supply voltage for I/O buffers, 1.8-V
operation
Supply voltage for I/O buffers, 1.5-V
operation
Input voltage
Output voltage
Operating junction temperature
5–2:
Table 5–2
Parameter
shows the MAX II device family recommended operating conditions.
MAX II devices
MAX II devices
MAX IIG and MAX IIZ
devices
Commercial range
Industrial range
Extended range
CC INT
and V
(2), (3),
Conditions
Using MAX II Devices in Multi-Voltage Systems
C CIO
—
—
—
—
—
are powered.
(4)
(5)
Chapter 5: DC and Switching Characteristics
Minimum
2.375
2.375
1.425
3.00
1.71
3.00
1.71
–0.5
–40
–40
0
0
© August 2009 Altera Corporation
Maximum
Operating Conditions
2.625
2.625
1.575
3.60
1.89
3.60
1.89
V
100
125
4.0
85
C CIO
chapter in the
Unit
°C
°C
°C
V
V
V
V
V
V
V
V
V