AD14060BF-4 Analog Devices Inc, AD14060BF-4 Datasheet - Page 40

• Manufacturer Part Number: AD14060BF-4
• Description: IC DSP CMOS 32BIT 308CQFP
• Manufacturer: Analog Devices Inc
• Series: SHARC®r
• Type: Fixed/Floating Pointr

Specifications of AD14060BF-4

• Rohs Status: RoHS non-compliant
• Interface: Host Interface, Link Port, Serial Port
• Clock Rate: 40MHz
• Non-volatile Memory: External
• On-chip Ram: 2MB
• Voltage - I/o: 5.00V
• Voltage - Core: 5.00V
• Operating Temperature: -40°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 308-CQFP
• Device Core Size: 32b
• Architecture: Enhanced Harvard
• Clock Freq (max): 40MHz
• Mips: 40
• Device Input Clock Speed: 40MHz
• Ram Size: 1.9073535156MB
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 308
• Package Type: CQFP
• Lead Free Status / Rohs Status: Not Compliant

AD14060/AD14060L
APPLICATIONS
DEVELOPMENT TOOLS
The AD14060/AD14060L is supported with a complete set of
software and hardware development tools, including an
in-circuit emulator and development software.
Analog Devices, Inc. (ADI) uses VisualDSP++®, which is an
easy-to-use integrated software development and debugging
environment (IDDE) that efficiently manages projects from
start to finish from within a single interface.
The ADSP-21262 EZ-KIT LITE™ provides developers with a
cost-effective method for initial evaluation of the ADSP-2106x
SHARC processor architecture for applications via a USB-based
PC-hosted tool set. With this EZ-KIT LITE, users can learn
about ADI’s ADSP-2106x hardware and software development
and can quickly prototype applications.
The EZ-KIT LITE includes an ADSP-2106x processor desktop
evaluation board, along with an evaluation suite of the
VisualDSP++ development and debugging environment with
the C/C++ compiler, assembler, and linker. VisualDSP++
development and debugging software, along with the USB-
based debugger interface, enables users to perform standard
debugging functions (such as read and write memory, read and
write registers, load and execute executables, set and clear
breakpoints, and single-step assembly, C, and C++ source
code).
The ADI cost-effective universal serial bus (USB)-based
emulator and high performance (HP) universal serial bus
(USB)-based emulator each provide an easy, portable, non-
intrusive, target-based debugging solution for ADI JTAG
processors and DSPs. These powerful USB-based emulators
perform a wide range of emulation functions, including single-
step and full speed execution with predefined breakpoints, and
viewing and altering of register and memory contents. With the
ability to automatically detect and support multiple I/O
voltages, the USB and HP USB emulators enable users to
communicate with all the ADI JTAG processors and DSPs
using either a full speed USB 1.1 or high speed USB 2.0 port on
the host PC. Applications and data can be easily and rapidly
tested and transferred between the emulators and the separately
available VisualDSP++ development and debugging environ-
ment (sold separately).
The plug-and-play architecture of the USB allows the host
operating system to automatically detect and configure the
emulators. The USB can be connected to and disconnected
from the host without opening the PC or turning off the power
to the PC. A 3-meter cable is included to connect the emulators
to the host PC, providing abundant accessibility to hard-to-
reach targets.
Rev. B | Page 40 of 48
The HP USB-based emulator supports the background
telemetry channel (BTC), a nonintrusive method for exchang-
ing data between the host and target application without
affecting the target system's real-time characteristics. Nonintru-
sive in-circuit emulation is assured by the use of the processor’s
JTAG interface. The emulator does not affect target system
loading or timing.
Further details and ordering information are available on the
analog.com Web site.
In addition to the software and hardware development tools
available from Analog Devices, third parties provide a wide
range of tools supporting the SHARC processor family.
Hardware tools include SHARC PC plug-in cards, multi-
processor SHARC VME boards, and daughter card modules
with multiple SHARCs and additional memory. These modules
are based on the SHARCPAC module specification. Third-party
software tools include an Ada compiler, DSP libraries, operating
systems, and block diagram design tools.
QUAD-SHARC DEVELOPMENT BOARD
The BlackTip-MCM, AD14060 development board with
software is available from Bittware Research Systems, Inc. This
board has one AD14060 BITSI interface, and PROM and SRAM
expansion options on an ISA card. It is supported by Bittware’s
SHARC software development package. To contact Bittware,
call 1-800-848-0436.
The AD14060/AD14060L contains 16 on-module 0.018 µF
bypass capacitors. It is recommended that, in the target system,
at least four additional capacitors of 0.018 µF value be placed
around the module, one near each of the four corners.
The top surface (lid) of the AD14060/AD14060L is electrically
connected to GND on the industrial and military grade parts.
TARGET BOARD CONNECTOR FOR EMULATOR
PROBE
The ADSP-2106x emulator uses the IEEE 1149.1 JTAG test
access port of the ADSP-2106x to monitor and control the
target board processor during emulation. The emulator probe
requires that the AD14060/AD14060L’s CLKIN (optional), TMS,
TCK, TRST , TDI, TDO, EMU , and GND signals be made
accessible on the target system via a 14-pin connector (pin strip
header) similar to Figure 26. The emulator probe plugs directly
into this connector for chip-on-board emulation. You must add
this connector to your target board design, if you intend to use
the ADSP-2106x emulator. The length of the traces between the
connector and the AD14060/AD14060L’s JTAG pins should be
as short as possible.
OTHER PACKAGE DETAILS