DS26519GN+ Maxim Integrated Products, DS26519GN+ Datasheet - Page 55

• Manufacturer Part Number: DS26519GN+
• Description: IC TXRX T1/E1/J1 16PRT 484-HSBGA
• Manufacturer: Maxim Integrated Products
• Type: Transceiverr

Specifications of DS26519GN+

• Number Of Drivers/receivers: 16/16
• Protocol: Ethernet
• Voltage - Supply: 3.135 V ~ 3.465 V
• Mounting Type: Surface Mount
• Package / Case: 484-BGA Exposed Pad, 484-eBGA, 484-HBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.8.3 H.100 (CT Bus) Compatibility
The H.100 (or CT bus) is a synchronous, bit-serial, TDM transport bus operating at 8.192MHz. The H.100 standard
also allows compatibility modes to operate at 2.048MHz, 4.096MHz, or 8.192MHz. The control bit H100EN
(RIOCR.5), when combined with RSYNCINV and TSSYNCINV, allows the DS26519 to accept a CT-bus-
compatible frame-sync signal (CT_FRAME) at the RSYNCn and TSSYNCIOn (input mode) inputs. See
and
The following rules apply to the H100EN control bit:
Figure
1) The H100EN bit controls the sampling point for the RSYNCn (input mode) and TSSYNCIOn (input
2) The H100EN bit would always be used in conjunction with the receive and transmit elastic store
3) The H100EN bit would typically be used with 8.192MHz IBO mode, but could also be used with
4) The H100EN bit in RIOCR controls both RSYNCn and TSSYNCIOn (i.e., there is no separate control
5) The H100EN bit does not invert the expected signal; RSYNCINV (RIOCR) and TSSYNCINV (TIOCR)
9-16.
mode) only. The RSYNCn output and other sync signals are not affected.
buffers.
4.096MHz IBO mode or 2.048MHz backplane operation.
bit for the TSSYNCIOn).
must be set high to invert the inbound sync signals.
55 of 310
DS26519 16-Port T1/E1/J1 Transceiver
Figure 9-15