ISP1563BMGA ST-Ericsson Inc, ISP1563BMGA Datasheet - Page 76

• Manufacturer Part Number: ISP1563BMGA
• Description: IC USB HOST CTRL HI-SPD 128LQFP
• Manufacturer: ST-Ericsson Inc

Specifications of ISP1563BMGA

• Applications: USB Host/Function Processor
• Interface: EHCI Interface
• Voltage - Supply: 3 V ~ 3.6 V
• Package / Case: 128-LQFP
• Mounting Type: Surface Mount
• For Use With: UM10066 - EVAL BRD FOR ISP1563
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ISP1563BM-S; ISP1563BM-S

Philips Semiconductors
9397 750 14224
Product data sheet
11.4.2 USBSTS register
Table 103: USBCMD - USB Command register bit description
Address: Value read from func2 of address 10h + 20h
The USB Status (USBSTS) register indicates pending interrupts and various states of the
Host Controller. The status resulting from a transaction on the serial bus is not indicated in
this register. Software clears the register bits by writing ones to them. The bit allocation is
given in
Bit
5
4
3 to 2
1
0
Table
Symbol
ASE
PSE
FLS[1:0]
HCRESET Host Controller Reset: This control bit is used by the software to reset
RS
104.
Description
Asynchronous Schedule Enable: Default = 0. This bit controls whether
the Host Controller skips processing the asynchronous schedule.
0 — Do not process the asynchronous schedule
1 — Use the ASYNCLISTADDR register to access the asynchronous
schedule.
Periodic Schedule Enable: Default = 0. This bit controls whether the
Host Controller skips processing the periodic schedule.
0 — Do not process the periodic schedule
1 — Use the PERIODICLISTBASE register to access the periodic
schedule.
Frame List Size: Default = 00b. This field is read and write only if PFLF
(bit 1 in the HCCPARAMS register) is set to logic 1. This field specifies the
size of the frame list. The size the frame list controls which bits in the
Frame Index register should be used for the frame list current index.
00b — 1024 elements (4096 B)
01b — 512 elements (2048 B)
10b — 256 elements (1024 B) for small environments
11b — reserved.
the Host Controller. The effects of this on Root Hub registers are similar to
a chip hardware reset. Setting this bit causes the Host Controller to reset
its internal pipelines, timers, counters, state machines, and so on, to their
initial value. Any transaction currently in progress on USB is immediately
terminated. A USB reset is not driven on downstream ports. This reset
does not affect the PCI Configuration registers. All operational registers,
including port registers and port state machines are set to their initial
values. Port ownership reverts to the companion Host Controller(s). The
software must reinitialize the Host Controller to return it to an operational
state. This bit is cleared by the Host Controller when the reset process is
complete. Software cannot terminate the reset process early by writing
logic 0 to this register. Software should check that bit HCH is logic 0 before
setting this bit. Attempting to reset an actively running Host Controller
results in undefined behavior.
Run/Stop: 1 = Run. 0 = Stop. When set, the Host Controller executes the
schedule. The Host Controller continues execution as long as this bit is
set. When this bit is cleared, the Host Controller completes the current and
active transactions in the USB pipeline, and then halts. Bit HCH indicates
when the Host Controller has finished the transaction and has entered the
stopped state. Software should check that bit HCH is logic 1 before setting
this bit.
Rev. 01 — 14 July 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
…continued
HS USB PCI Host Controller
ISP1563
76 of 107