MT48H16M32LFCM-75 IT ES Micron Technology Inc, MT48H16M32LFCM-75 IT ES Datasheet - Page 78
![](/photos/31/34/313421/mfg557-90-vfbga_sml.jpg)
MT48H16M32LFCM-75 IT ES
Manufacturer Part Number
MT48H16M32LFCM-75 IT ES
Description
Manufacturer
Micron Technology Inc
Type
Mobile SDRAMr
Datasheet
1.MT48H16M32LFCM-75_IT_ES.pdf
(86 pages)
Specifications of MT48H16M32LFCM-75 IT ES
Organization
16Mx32
Density
512Mb
Address Bus
15b
Access Time (max)
8/5.4ns
Maximum Clock Rate
133MHz
Operating Supply Voltage (typ)
1.8V
Package Type
VFBGA
Operating Temp Range
-40C to 85C
Operating Supply Voltage (max)
1.95V
Operating Supply Voltage (min)
1.7V
Supply Current
95mA
Pin Count
90
Mounting
Surface Mount
Operating Temperature Classification
Industrial
Lead Free Status / Rohs Status
Compliant
SELF REFRESH Operation
PDF: 09005aef82ea3742
512mb_mobile_sdram_y47m.pdf – Rev. H 12/09 EN
The self refresh mode can be used to retain data in the device, even when the rest of the
system is powered down. When in self refresh mode, the device retains data without
external clocking. The SELF REFRESH command is initiated like an AUTO REFRESH
command, except CKE is disabled (LOW). After the SELF REFRESH command is regis-
tered, all the inputs to the device become “Don’t Care” with the exception of CKE,
which must remain LOW.
After self refresh mode is engaged, the device provides its own internal clocking, ena-
bling it to perform its own AUTO REFRESH cycles. The device must remain in self
refresh mode for a minimum period equal to
an indefinite period beyond that.
The procedure for exiting self refresh requires a sequence of commands. First, CLK
must be stable prior to CKE going back HIGH. (Stable clock is defined as a signal cycling
within timing constraints specified for the clock ball.) After CKE is HIGH, the device
must have NOP commands issued for a minimum of two clocks for
required for the completion of any internal refresh in progress.
Upon exiting the self refresh mode, AUTO REFRESH commands must be issued accord-
ing to the distributed refresh rate (
AUTO REFRESH utilize the row refresh counter.
512Mb: 32 Meg x 16, 16 Meg x 32 Mobile SDRAM
78
t
REF/refresh row count) as both SELF REFRESH and
Micron Technology, Inc. reserves the right to change products or specifications without notice.
t
RAS and remains in self refresh mode for
SELF REFRESH Operation
© 2007 Micron Technology, Inc. All rights reserved.
t
XSR because time is