PCF8566T NXP Semiconductors, PCF8566T Datasheet - Page 43

• Manufacturer Part Number: PCF8566T
• Manufacturer: NXP Semiconductors

Specifications of PCF8566T

• Operating Supply Voltage (typ): 3.3/5V
• Number Of Digits: 12
• Number Of Segments: 96
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: VSO
• Pin Count: 40
• Mounting: Surface Mount
• Power Dissipation: 400mW
• Frequency (max): 315KHz
• Operating Supply Voltage (min): 2.5V
• Operating Supply Voltage (max): 6V
• Lead Free Status / Rohs Status: Not Compliant

NXP Semiconductors
18. Soldering of SMD packages
PCF8566_7
Product data sheet
18.1 Introduction to soldering
18.2 Wave and reflow soldering
Table 24.
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note AN10365 “Surface mount reflow
soldering description” .
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for fine pitch SMDs. Reflow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reflow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature profile. Leaded packages,
packages with solder balls, and leadless packages are all reflow solderable.
Key characteristics in both wave and reflow soldering are:
Symbol
E
F
G
H
x
y
•
•
•
•
•
•
•
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Board specifications, including the board finish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Tray dimensions
Description
tray width; x direction
tray width; y direction
cut corner to pocket 1,1 center
cut corner to pocket 1,1 center
number of pockets; x direction
number of pockets; y direction
Rev. 07 — 25 February 2009
…continued
Universal LCD driver for low multiplex rates
Value
50.8 mm
50.8 mm
5.47 mm
5.47 mm
10
10
PCF8566
© NXP B.V. 2009. All rights reserved.
43 of 48