ZFSM-201-KIT-1 CALIFORNIA EASTERN LABS, ZFSM-201-KIT-1 Datasheet - Page 16

• Manufacturer Part Number: ZFSM-201-KIT-1
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of ZFSM-201-KIT-1

• Lead Free Status / Rohs Status: Not Compliant

The status bar at the bottom of the screen showing:
4.3
Note: It is strongly recommended that the USB cable be plugged directly into the PC and not through a USB Hub
to avoid COM port conflicts.
The first time a ZFSM-201-EVB-1FreeStar Pro Evaluation Board is connected to a computer,
the PC will install virtual serial port drivers and a COM port number will be assigned to the
evaluation board. To check which COM port is assigned to the USB connection follow steps 2)
through 5):



1) Attach a USB cable (supplied) between the ZFSM-201-EVB-1 and the PC.
2) Open the Windows ‘System Properties’ window using ‘Start’->’Control Panel’ ->’System’ or right
3) In the ‘System Properties’ window under the ‘Hardware’ tab, click the ‘Device Manager’ button as
Comm Port: The PC COM port number through which the evaluation board is connected
(or none).
Baud Rate: The speed of the connection from the PC to the evaluation board
Status: The connection status of the evaluation board:
click on ‘My Computer’ in the ‘Start’ menu and select ‘Properties’ from the drop down menu.
indicated in Figure 4.
4.2.6
COMMUNICATIONS SETUP
4.3.1
o
o
Rev B
‘Status: No transceiver detected’
‘Status: Found FreeStar Pro Module’
Comm Status Window:
Virtual Serial Port Setup
Figure 4 – Screen, Windows System Properties
Document No. 0006-00-08-00-000
Page 16 of 42