ZFSM-201-KIT-1 CALIFORNIA EASTERN LABS, ZFSM-201-KIT-1 Datasheet - Page 28

• Manufacturer Part Number: ZFSM-201-KIT-1
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of ZFSM-201-KIT-1

• Lead Free Status / Rohs Status: Not Compliant

Two evaluation boards connected to One PC (see Figure 20).
Two evaluation boards connected to Two PC’s (see Figure 21).
One evaluation board connected to a PC, one board operating in standalone mode (see
Figure 22).
For the demonstration tests that follow, Mode C configuration (as described here) is used.
1) Open two sessions of the FreeStar Pro Test Tool on the same computer.
2) Configure the receiver in one session and the transmitter in the other session.
1) Open one session of the FreeStar Pro Test Tool on each computer.
2) Configure the receiver on one computer and the transmitter on the other computer.
1) Open a single session of the FreeStar Pro Test Tool on the computer.
2) For the ‘Range’ Test, the board connected to the computer can be configured either as the receiver or
as the transmitter. For the ‘PERT’ Test, the board connected to the computer should be configured as
the receiver. See the details in the sections (5.3 and 5.4) for each of these demonstration tests below.
5.2.1
5.2.2
5.2.3
Rev B
Figure 22 – Diagram, One board wired to the computer, one linked wirelessly
Mode A: One PC, Two Boards Connected
Mode B: Two PC’s, Two Boards Connected
Mode C: One PC, One Board Connected – One Standalone
Figure 21 – Diagram, Two computers one session on each
Figure 20 – Diagram, Two sessions, one computer
Document No. 0006-00-08-00-000
Page 28 of 42