ZFSM-201-KIT-1 CALIFORNIA EASTERN LABS, ZFSM-201-KIT-1 Datasheet - Page 22

• Manufacturer Part Number: ZFSM-201-KIT-1
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of ZFSM-201-KIT-1

• Lead Free Status / Rohs Status: Not Compliant

The test under this tab will set up a transmission (single or continuous) between two evaluation
boards, and measure the Link Quality Indication parameter for their communications link.






Data: The message to be sent (thirteen 1-byte fields).
Dest Address: The ‘Transceiver ID’ of the evaluation board being used as the receiver.
Message Source: Defines the message in the data fields, as follows:
ACK’s: Determines whether the transmitter asks for an acknowledgement of its message,
as follows:
Rate: Defines the transmission rate, as follows:
Transmit: Starts the transmission of packets.
4.4.3
o
o
o
o
o
o
Rev B
4.4.3.1
Predefined: Fills the Data fields with predefined numbers (1 ~ 13).
User Defined: Allows the user to change any of the data values (0 ~255) in the 13 ‘Data’
fields.
Disable: Turns OFF the acknowledgement request.
Enable: Turns ON the acknowledgement request.
Single: Transmits a single packet.
Continuous: Transmits the packet repeatedly until stopped manually (i.e. can be stopped
with the RESET button).
Range Tab
Transmitter Section
Figure 14 – Screen, Test Tool – Range Test
Document No. 0006-00-08-00-000
Page 22 of 42