ZFSM-201-KIT-1 CALIFORNIA EASTERN LABS, ZFSM-201-KIT-1 Datasheet - Page 38

• Manufacturer Part Number: ZFSM-201-KIT-1
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of ZFSM-201-KIT-1

• Lead Free Status / Rohs Status: Not Compliant

Note: the ‘Erase flash before programming’ option DOES NOT WORK. The Flash memory must
already be erased (using the procedure in Section 7.2) in order to successfully perform an upload to Flash.
5) Choose the ‘COM Port’ to which the evaluation board is connected, change the ‘Baudrate’ to
If the ‘COM Port’ needs to be determined, the Test Tool program has a convenient link to Device
Manager to do so. Notice (in Figure 32) that ‘Device Manager’ is just below ‘Communication Settings’
in the ‘Tools’ menu. Click on ‘Device Manager’ and follow the procedure in Section 4.3.1.
6) As shown in Figure 35, click on the ‘View’ menu, click on the ‘Firmware Loader’ and ‘MC1322x
‘115200’ and click ‘OK’. The chosen evaluation board will be displayed on the screen as in Figure 33.
Click ‘Close’.
Firmware Loader’ in the Pop-ups. The screen in Figure 36 will appear. Select the device (defined in
Figure 33) and click ‘OK’. The screen in Figure 37 will be displayed.
Rev B
Figure 34 – Screen, FSTT – Comm Dev Setting
Figure 35 – Screen, FSTT – Firmware Loader
Figure 36 – Screen, FSTT – Device Selection
Document No. 0006-00-08-00-000
Page 38 of 42