ZFSM-201-KIT-1 CALIFORNIA EASTERN LABS, ZFSM-201-KIT-1 Datasheet - Page 36

• Manufacturer Part Number: ZFSM-201-KIT-1
• Manufacturer: CALIFORNIA EASTERN LABS

Specifications of ZFSM-201-KIT-1

• Lead Free Status / Rohs Status: Not Compliant

7 DOWNLOADING TO FLASH THROUGH THE USB
In the event that the Application firmware on one of the evaluation boards needs to be
reinstalled, this section describes a simple procedure for downloading to Flash memory using
the ‘MC1322x Firmware Loader’ tool in the Freescale Test Tool program (Version 11.1.0).
Please refer to Freescale Semiconductors’ “Freescale Test Tool User’s Guide” (Freescale Doc # TTUG)
for detailed information and explanations on this specific tool or for the rest of the program.
7.1
For information on downloading this program refer to the Section on Installing BeeKit™ in
“ZFSM-201-EVB-1 BeeKit Porting Guide” (CEL Doc #0006-00-08-03-000)
7.2
This section describes a hardware procedure for erasing the Flash memory of the ZFSM-201-1
Module. If using the Freescale Test Tool to upload firmware, the Flash memory must be
erased prior to programming.
7.3


1) With power applied to the evaluation board, attach shorting jumpers to the ‘FLASH Erase Jumpers’
2) Press the ‘RESETB’ switch. See Figure 30 for its location.
3) LED 1, LED 2, and LED 3 should all be illuminated. The FLASH memory is now erased.
4) Remove the shorting jumpers.
1) Connect the evaluation board (with FLASH memory erased) to the PC using a USB cable. Apply
One ZFSM-201-EVB-1 FreeStar Pro Evaluation Board.
The Freescale Test Tool program which is downloaded as a part of the BeeKit™
download
‘J19’ and ‘J20’. See Figure 30 for their location (shown without jumpers).
power to the board. LED’s 1, 2, and 3 should be illuminated, indicating that the memory has been
erased.
PREREQUISITE HARDWARE AND SOFTWARE
ERASING FLASH MEMORY
DOWNLOADING NEW FLASH IMAGE
Rev B
Figure 30 – Photo, EVB Details (FLASH Erase Jumpers & RESET)
Document No. 0006-00-08-00-000
Page 36 of 42